Jump to content
SAU Community

Recommended Posts

Hey, basically my car was (safe) tuned and dynoed on 14psi with the stock rb20det turbo... mods are as follows : 600x300x76 PWR FMIC, microtech ltx-8, custom plenium,bov etc..

Car is currently running at 12psi just to be REALLY safe but I can smell the fuel!! too rich!!

Now, would it be safe to run at 15/16psi, Say if I ran 1.1 bar, would that lean out?? I know it's kind of hard to tell, but would an extra 1 pound or so be detrimental??

I dont really give a crap if my exhaust wheel goes by by, excuse for a new turbo..

I'd much rather that happen than my engine leaning out and going bang

It's definately running rich though

Would  you really want to risk it for just 1 or 2 psi? Go get it checked out I say. And the fuel smell you're getting can be leaks in fuel lines or a faulty fuel regulator.

14psi certainly wouldnt be a risk, as it was tuned at 14psi, and safely as well..

so i'm asking if 1 or 1.1 bar would be silly

i'm sure 3-4 psi would make a noticable difference, and if the fuel is there, i might as well use it

I dont really give a crap if my exhaust wheel goes by by, excuse for a new turbo...

Go talk to GTRGeoff and RowdyR32, they've both had turbo's let go and shoot ceramic in to the ENGINE, you don't always end up with it just in you cat. Running ceramic turbine wheels to destructin is NOT a risk free exercise.

Also by 1 bar you're already past efficiency on a stock RB20 turbo, it's heating the air WAY too much to be a good idea, stick to ~12psi (spiking to 14psi odd) until you get a better turbo.

My 2c.

it's the exhaust gas temp kill the ceramic wheel, that's about tuning, it will make a different with good tune

i will say running 1 bar is fine as long as the tune is good.

run rich will make it cooler, which is good, keep it rich but throw in more timing ;)

lean it up will only cause yr turbo blow easier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So where is this message group so we can organise another meet? Keen to come along and catchup. Might eventually be in a skyline again next year, but the Mustang will have to do for now. Also need to get the WRX back on the road. Stupid f**king money pit that thing is.
    • Stock equivalent turbo replacement is a bit of a nightmare. The old Hitachi ceramic things were pretty good for their time, but they have primitive, vintage aerodynamics. The only thing they have going for them is a light turbine**, and there are plenty of other light turbine options these days, in both materials and CNC manufacturing methods. So, the old stocker makes absolutely no power at all compared to its physical size and its (not very low) boost threshold and response. ** and the ONLY thing that was good about the ceramic turbine was that it was light. In all other respects it is a nightmare. To get a turbo that is anywhere near equivalent in terms of power capacity (ie, to avoid it being "bigger" and needing tuning/fuelling/etc) you have to physically downsize. And that is not a "stockish" replacement. Doesn't just fit where the old one did. At least a frame size down, probably need a new dump, probably need new inlet and outlet piping made on the compressor side, new hose connections as D said above. I say, if you have to suffer that much work, you might as well do the same work to fit an even bigger (than stock) turbo, have more power (and hence have to do injectors, ECU, etc), and love life, instead of suffering with stock power levels. Or, you get a light highflow from someone like Hypergear. A highflow that has not been pushed too far from stock. There are still modification consequences here though. HG's cores are smaller than the massive Hitachi core, so it is shorter, moves the compressor housing backwards and requires mods to the air side piping. Plus new hoses. Looks stock, mostly fits where the stock one did (with the previous caveats mentioned), makes a bit more power but can be run at stock boost levels and not cause too many ECU problems. But, seriously. It's 2024. Like - 25 years since the R33 came out. It's time to put an ECU in it. I Nistuned my car (on RB20 ECU then later again on the Neo ECU) and it was the single best thing possible for minimal money. Dial out the R&R bullshit, fix up the fuelling and timing to make it more efficient for normal driving (cut fuel consumption by >10%). Nistune is not an option for you unless you change the ECU, so you might as well just do a standalone. it will be worth it. And then you can tune it up to the limits of the injectors and AFM, which is pushing 200rwkW and enjoy some actual squirt, instead of the lazy barge-like motion you get from a stock engine, turbo and management.
    • He can't post pics until he's at 10 post count.
    • Welcome James.....will be interesting to see how much fun there is in the project. .....where's the pics?
×
×
  • Create New...