Apexi Avcr - How To Use It?

[TUFr32]

hey guys,

my r32 has an apexi avcr and i wanna change the boost, at the moment it is on 1:00kg2 but i wanna put it down but under it it says duty: 20% do i hafto change that also? i wanna run 10-11psi but i dont know how to configure it... can sum1 who knows how help...

thanks

[Roy]

So when you turn the AVC-R off what boost are you runnning. I found witha good exhaust, intercooler and filter my R32 GTST ran 0.88bar, so was never able to run any less boost then that.

Basically if thats the sort of boost you want to run, then just chaneg the setting to 0.75, lower duty as much as possible and see how it goes...odds are though i bet your car wants to run at least 0.80bar of boost without even touching a boost controller

[TUFr32]

So when you turn the AVC-R off what boost are you runnning. I found witha good exhaust, intercooler and filter my R32 GTST ran 0.88bar, so was never able to run any less boost then that.

Basically if thats the sort of boost you want to run, then just chaneg the setting to 0.75, lower duty as much as possible and see how it goes...odds are though i bet your car wants to run at least 0.80bar of boost without even touching a boost controller

<{POST_SNAPBACK}>

i put the boost to 75% but what boost duty do u recomend, i have fmic, pod, bov, e-manage also