Jump to content
SAU Community

Recommended Posts

might be getting a job in sydney soon so just wondering if any of you guys can answer a few questions.

the company is in the northern suburbs...whats a good low rent area around there to live?

is the cost of living really that high compared to melbourne?

Where abouts in the Northern subs? I live in the north because of my work and it is expensive but its all relative to what you earn and depends if or how far you want to travel to work. A one bedroom apartment will be around $800 a month, if yo cna find someone to share with it will be cheaper. I live with two mates in a three bedroom apartment and we pay about $480 a week together.

I was born in Melbourne but never paid rent there so I cant really help with a cost of living comparison. But Im pretty sure that Sydney is pretty expensive compared to most cities. The closer you get to the city the more you pay.

Hope that helps abit.

Link to comment
https://www.sau.com.au/forums/topic/86449-moving-to-sydney/#findComment-1563504
Share on other sites

Depends where North. If you live in the Northern westish (of the coast) suburbs like Hornsby etc it's not prohibitively expensive (hornsby, horsnby heights, berowra, etc).

Northern Beaches isn't terrible either. 2 bedroom small unit will be around $200-250 a week with possibly one LUG. (dee why, narrabeen, colleroy etc)

Best bet is to hit domain.com.au or the other home rent/sell site which I can't remember and check it out.

Anyone who has mentioned prices without their suburbs is guessing pretty blindly since you haven't mentioned a suburb.

Finally "Northern suburbs" = Hills District or North Shore or Northern Beaches? They're all pretty different. If you tell us the suburb maybe we can suggest things better.

Link to comment
https://www.sau.com.au/forums/topic/86449-moving-to-sydney/#findComment-1563697
Share on other sites

heh the northern suburbs is a bit shocking with the cost of rent averaging $350 - $420 per week for a 1 bedroom apartment. About $300 for a studio apartment. Prices start at $480 for a 2 bedroom place. These are Chatswood central prices so places get cheaper if they radiate into the smaller suburbs away from amenities. They get more expensive though if its got a view (North Sydney for example), and they get more expensive again if its one of the prestige suburbs (there's a lot of wanky suburbs north of the bridge).

You can find cheaper if you are willing to share accomodation or move into a less than perfect place you can get away with as low as $260 - $280 p/w. You may not find suitable parking at those cheaper locations though.

Link to comment
https://www.sau.com.au/forums/topic/86449-moving-to-sydney/#findComment-1563823
Share on other sites

which areas are the cheapest ?

Mount Druitt , but you wouldn't want to live there ...

Sydney is more expensive than Melbourne , just add 20-25% to a compareable Melbourne property .

Link to comment
https://www.sau.com.au/forums/topic/86449-moving-to-sydney/#findComment-1566831
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I agree re not trusting it as it makes mistakes however can do hours of research for you at times by simply asking a question
    • The I've done a lot of research and feel like I'm becoming a nut and washer expert. The washer in question doesn’t look very conical—it’s almost flat, but one side has a chamfer. The guide's picture shows the convex side (chamfered side) facing the nut, but the text says the chamfer should face the pulley, which is confusing. If I follow the picture, the chamfer faces the nut, but the instructions say the opposite. When I place the washer on a flat surface, one side looks flatter—maybe that's the concave side—so I would expect the chamfer to be on that side. But it isn’t, which adds to the confusion. The term chamfer is also throwing me off. I always thought the concave side should face the pulley, and the convex side (with the chamfer) should face the nut or bolt head. But Nissan’s instructions say the chamfer should face the pulley, which seems backward. I know I’m probably overthinking it, but I want to be sure I’m doing it right. Also, I’ve seen some people replace the nut and stud with a bolt, but I assume that’s not a good idea, since it might not keep proper tension on the tensioner. Lastly, just to be 100% sure: the pressure washer should face the pulley, then the conical washer? That feels strange, since usually the pressure washer goes first, facing the bolt or nut.
    • I checked, i dont think it was the indicator stalk. The problem just magically fixed itself though. 
    • H1 is not the Humvee, but is the most road based version. Lachlan (HankScorpio) on here has a proper Humvee. He imported it a few years back.
    • Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
×
×
  • Create New...