Fitting Dump Pipe To R33 Skyline

[plaganis]

Hi All,

Can anyone give me a few installation tips on installing the turbo back dump pipe for a R33 Skyline. I know the procedure and what needs to be done but is there anything tricky that I need to know about or look out for.

Any advice is appreciated.

Regards,

Paul.

[leech_]

alot of wd40 and maybe a few spare stud heads as you will probably break some

[ATTN]

Its prettys tricky how do you plan to put it on?

you have to jack up your car or put it on a hoist

[mad34]

you will need car stands and will prolly need to take your bonnet off thats what i had to do to put my dump pipe on. I was lucky enough to not break any studs.

[Robo's]

There is no need to take the bonnet off, need to jack it up and work from underneath and ontop. One bolt is particularly hard and you need to spend some time on it. Otherwise its quite easy.

[mad34]

robos right you can do it without taking it off, but i am no good at yoga so i took the bonnet off.

[plaganis]

Thanks for the tips, I will work from top and bottom. I know all about the possibility of breaking studs but hope not too!!

As for taking the bonnet off I'll try and work around it. Don't want to make the job bigger than what it is.

Thanks again.

Paul.

Edited September 5, 2005 by plaganis