Jump to content
SAU Community

So Im Finally Buying An R34


DJR34
 Share

Recommended Posts

Hey guys, im finally gonna achieve my dream which is to own an R34. Ive seen one that i want and im gonna go get it, but id like some advice first.

THe car is a 98 GTT, done 40,000k's , its stock and i can get it onroad for $35k.

Does this seem reasonable? ive seen the car and it appears in top condition but i want to cover all my bases b4 buying. Then i have to deal with selling my R33 lol.

Any info would help

Link to comment
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

well id say the same as any stock R34...

well imported they range from 27k+ that includes compliance... so lets say you get one for 30k landed and complied... by the time you rego it, pay for the duty to rego it and clean it up its probably better off going for one u can go look at... test drive... get inspected etc.

i reckon you should go for it

Link to comment
Share on other sites

well the car is 34900 but the guy wants to get rid of it quickly and its already been complied so on road including rego and stamp duty is $35k, which i think is a pretty good deal.

And it is stock except for the Tein suspension and a few Nismo exterior additions, like indicator covers and i think a Nismo kit, altho im not sure if that kit is stock.

Link to comment
Share on other sites

Make sure you take someone with you, preferably some one that knows alot about Skylines or at least a pannel beater or a mechanic.

Car yards can talk a lot of crap and hide a lot of faults, be careful

Link to comment
Share on other sites

34's rust around the stop light in the bootlid so check for that....look for tape off's around the door apature,window moulds and boot apature for history on refinishing....also look for jaw marks on the sill/floorpan lap join for any history of the car being pulled about on a pulling rack or bench.Check door aparture to inner panel for original spot welds(you will need to slide up the pinch weld to check that)also check the radiator support panel/back panel for original spotwelds and might as well have a good look at the chassis rails/floor for any signs of meddleing...all this stuff is very easy to check without the need of any tools....i have looked at many cars for people checking all these things and within 5 minutes tell wether to look further or to walk....usually the latter!Goodluck!

Link to comment
Share on other sites

34's rust around the stop light in the bootlid so check for that....look for tape off's around the door apature,window moulds and boot apature for history on refinishing....also look for jaw marks on the sill/floorpan lap join for any history of the car being pulled about on a pulling rack or bench.Check door aparture to inner panel for original spot welds(you will need to slide up the pinch weld to check that)also check the radiator support panel/back panel  for original spotwelds and might as well have a good look at the chassis rails/floor for any signs of meddleing...all this stuff is very easy to check without the need of any tools....i have looked at many cars for people checking all these things and within 5 minutes tell wether to look further or to walk....usually the latter!Goodluck!

lol id prob only know where to look for half that stuff, but ill try to check it all out thanx

Link to comment
Share on other sites

34's rust around the stop light in the bootlid so check for that....look for tape off's around the door apature,window moulds and boot apature for history on refinishing....also look for jaw marks on the sill/floorpan lap join for any history of the car being pulled about on a pulling rack or bench.Check door aparture to inner panel for original spot welds(you will need to slide up the pinch weld to check that)also check the radiator support panel/back panel  for original spotwelds and might as well have a good look at the chassis rails/floor for any signs of meddleing...all this stuff is very easy to check without the need of any tools....i have looked at many cars for people checking all these things and within 5 minutes tell wether to look further or to walk....usually the latter!Goodluck!

yep, Troy went over my car like that... and i got the rust around the stop light... but as far as i can remember, didn't have problems with the other stuff ;) Lucky i guess. I imported.

Link to comment
Share on other sites

and what troy just put up should be your basic check for ANY car guys not just an R34 (apart from the R34 tail lights bit altho a lot of cars tend to rust around the rear lights as a lot of water gets trapped in those areas running off the boot wells)

Link to comment
Share on other sites

Also, if i buy the car, i apparently get a holiday anywhere in Oz to the value of 3k. I dont really want the holiday and i was thinking to try and get the price of the holiday knocked off the car lol.

Ill do an inspection of the car again when i go down on wed. the only things i noticed when i saw it last was a sort of deep scratch in the top part of the boot on the outside..the car looked good, but i was told it hasnt been cut and polished yet and it will look better, so when thats done it will prob get most of the scratch out, but its not totally removable..that was my only concern, plus some of the steering wheel leather has worn away and u can see the foam underneath.

But apart from those the car is in top condition.

Oh and it has a GTR trim on the inside.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • I am currently going this route. I am curious how much horse power you put behind the cut bell housing? Collins was telling me I am going to crack it and bluh bluh bluh. Because I didn’t buy the custom fly wheel from him. I am looking for somewhere around like 500 hp
    • Forgot to mention that these are the before pics when I first got it!
    • Thanks @PranK for the updated member status, much appreciated! 👍🏼 Now, about those pics… Unfortunately I could only find ones that I took in the dark. I was soon to discover that underneath it wasn’t in the best shape, but it was mine and that’s all I cared about at the time 😆
    • Oh, and only having done this task yesterday, I've now driven the car ~60km since, and while it is hard to avoid placebo effect and confirmation bias, I reckon that some annoyances I had with the way the car has been behaving have improved. Which....kinda makes sense, I guess. If the bushes were really stiff and resisting rotation, they would have been contributing to the effective wheel rate. And if it was more so on one side (which it was, because one side was worse than the other) then.... you might imagine that the additional rate would be asymmetric, and potentially even different between compression and rebound. And so... the car has been twitchy at higher speeds - like freeway on ramps. It really shouldn't be. The wheel alignment is good and there are no (other) known problems elsewhere in the suspension. But at 90-100 on a long sweeping ramp, tiny steering wheel motions would make it feel like it wanted to rear steer. Quite nervous. At lower speeds it would heave about in a manner that it didn't use to. Didn't want to put power down, etc etc. Now...seems to behave better. Am going to have to concentrate on the various corners where it has exhibited weirdness, on the rare occasions when I can get a decent run at them without Methanial getting in the way in his D-Max/Ranger/LDV Van/etc.
×
×
  • Create New...