Jump to content
SAU Community

Recommended Posts

if i get the holiday im not going, i would give it to someone. i dont have time to go and i know it sounds suss, but still its a top car and its from a reputable place lol. ANd now u guys have planted doubt in my mind im starting to have second thoughts....sigh...its such a nice car

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if i get the holiday im not going, i would give it to someone. i dont have time to go and i know it sounds suss, but still its a top car and its from a reputable place lol. ANd now u guys have planted doubt in my mind im starting to have second thoughts....sigh...its such a nice car

Following the wise words of Obi Won Kenobi: "Use the force Luke..."

Doesn't matter what everyone here says, in the end the car is yours and so is the decision. What everyone is saying is quite valid, but only you would be able to know for sure. Just be wary of the "holiday" thing; question it and don't commit to anything until you're satisfied with the answers...

Just a quick update...i went down to see the car again today to check it more thoroughly, and it looks like i may get it. I looked for any of the problems listed but i couldnt find anything obvious.

As to the crap steering wheel, apparently the one on the car now was just an old one put on for compliance as the car had an aftermarket wheel originally, so when i get the car they will put back the aftermarket or put a brand new factory wheel on, which i was happy about.

There is also some slight water marks on the drivers seat because the window was left open on the boat and water got into the car, but i am assured that the car is being steam cleaned and it will remove all of it. The minor body scratches will be removed in the cut/polish all except for the one on the boot, which isnt totally removable.

All in all, for the price, i think its a good deal. I am gonna sell my car for 15-18k hopefully, so thats pretty much half of the total price so im not really paying 35k, which is the main plus point that validates all this in my conscience lol. Thanx for all the input guys i really appreciate it and ill update u guys when i know more.

Edited by DJR33
Just a quick update...i went down to see the car again today to check it more thoroughly, and it looks like i may get it. I looked for any of the problems listed but i couldnt find anything obvious.

As to the crap steering wheel, apparently the one on the car now was just an old one put on for compliance as the car had an aftermarket wheel originally, so when i get the car they will put back the aftermarket or put a brand new factory wheel on, which i was happy about.

There is also some slight water marks on the drivers seat because the window was left open on the boat and water got into the car, but i am assured that the car is being steam cleaned and it will remove all of it. The minor body scratches will be removed in the cut/polish all except for the one on the boot, which isnt totally removable.

All in all, for the price, i think its a good deal. I am gonna sell my car for 15-18k hopefully, so thats pretty much half of the total price so im not really paying 35k, which is the main plus point that validates all this in my conscience lol. Thanx for all the input guys i really appreciate it and ill update u guys when i know more.

what kind of 33 do you have? i'm in the market for 1...so PM me with some details

Also, i tried to get them down under 35k but theyre not budging, mainly coz of the colour of the car, which apparently is extremely rare. Its a dark blue with a reddish purple pearl. Its in fact a factory colour so i was amazed. ive never seen one that colour before, i thought it was a spray job. Either way, the colour is beautiful and that was the main selling point for me

Edited by DJR33
If you are sure it hasn't been repainted, then they are correct, it is a rare factory colour, but i always thought it only came out on R34 GTR's.

No im sure its a factory job...the guy showed me the Japanese R34 Nissan brochures...(very nice btw, wish i could get one of them) and for the GTT its one of the factory colours..i originally wanted bayside blue as ive seen some GTT's with that but i was told it was GTR only, but ive since learned that a small amount of GTT's were made in bayside blue. Still this dark blue/purple is pretty nice.

also, since ill prob be getting this car, can u guys give me some info on some skyline specialists that would do on site inspections of this car? any info would be greatly appreciate.

I want someone who knows skylines to do a workover of the car. i dont think theres anything wrong with it, but i just want to make sure

dark blue with reddish pearl? we're not talking midnight purple III here are we?? that's a GTR only colour as far as i know. I thought i've learnt pretty much all there is to know about GT-T, series 1 and 2. What year is it? If it's series 1. i HIGHLY doubt it's a factory colour. I've got series 2 brochures and it's certainly not there and i've never in my life seen the colour you're talking about. Here or at the auctions when i bought mine.

Did you get a paint code, ie TV2 = Bayside Blue...

holiday is a new one, never heard of that before...

what colour is the engine bay?

i swear dark blue with reddish/purple pearl is not a factory colour

gtr34new.jpg

108c.jpg

Paint code = LXO

Don't think there is too much variation for GT-T.

BNR34

TV2 - Bayside Blue

QM1 - White

KR4 - Sonic Silver

KV2 - Athlete Silver

GV1 - Black Pearl

AR2 - Active Red

EV1 - Lightning Yellow

LV4 - Midnight Purple II

LX0 - Midnight Purple III

WV2 - Sparkling Silver

QX1 - White Pearl

EY0 - Silica Breath

JW0 - Millennium Jade

The engine bay was the same colour as the car too, otherwise i wouldve assumed it was a respray.

the pearl u cant really see as the car needs a cut and polish but when its done and the sun is on the car itll be visible.

I have seen this colour actually once, in a sold auction on prestige motorsports site, so its not a one off i dont think either, but i know for a fact its not midnight purple

anyone know any "skyline specialists" who can do onsites? as well as offsite inspections?

post-3484-1126018595.jpg

post-3484-1126018612.jpg

Edited by DJR33

jogging some memories... i know there was a similar R33 colour to that as well...

Series II colours:

colours.jpg

That car is a series 1... it must be SUPER rare...

if they've shown u a brochure... guess it's genuine then

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well some mostly good news and some slight bad news.  Good news is cylinder 6 did in fact only require a honing and I'm good to run my 86.5mm pistons again. I should also get the block back by end of week. Bad news, had a few surprises pop up. First, main and rod bearings were trashed. No sign of any heat damage. I knew right away what caused this... I had not packed my oil pump originally and spent a lot more time than I would have liked cranking the motor to get oil pressure. It sounded fine once started so I chucked it up to luck and forgot about it. Luckily rod and crank are fine and just need new bearings. Engine builder agreed that this was the cause.    Another surprise that carbon covered up very well that I didn't catch, something got sucked up and went through cylinder 1, 2 and 3. Luckily this was no cause for concern, just needed a bit of cleaning up. Valves look fine but he will vacuum test the head this week to confirm. I'm presuming this was something left over from welding my intercooler piping, but we'll never know. I'm going to thoroughly reclean everything.    So all in all, happy the motor is fine, and I'll get it back much sooner than expected. I'll also be taking the time to convert my WMI system over to direct port. I'll snap some pictures of that when the parts come in. 
    • I understand, thanks. Yeah I wouldn't want the car to tip over, I'll try and use the sills, I don't want to risk smashing the chassis rails. I ordered some rubber pucks that have a hopefully big enough slotting. If the front right gives me trouble I can always just make a wood block. I'll measure and inspect the sills closer once I actually take the car up. I hope so, but the rubber blocks I had in hand so far were pretty damn firm, if they are that hard they won't give much way. I'll let you know what happens. Angle grinding rubber isn't one of my favorite tasks. I'll probably start a build thread soon, for my own documentation and "log" as well as sharing what's going on with the car.
    • Kinda something I have been thinking about.  To be honest, we bought it already driving like that.  So there's no telling how long it actually has been driving like this.  Hopefully damage is too bad when we drop the pan.   I am having a hard time finding a site that sells the solenoid for the 5 speed auto, do you have any suggestions?
    • That'll be most likely down the road...  LOL  
    • a stock / option or aftermarket?
×
×
  • Create New...