Jump to content
SAU Community

Recommended Posts

i went to my mechanic because i needed to replace my water pump. it was ment to be a $300 job (parts and labour). the night it was done i was on my way to the central coast from sydney and.......i lose all power and my car stalls on the f3???

WTF happened??? :huh:

i spent $220 to get it towed to my other mechanic. the next afternoon i was there while they stripped the motor down. timing belt was 50% of its normal thickness. little strands and belt reminence was everywhere. the head was taken off and just as i suspected...exhaust valves were f@kt! slight scratches on the top of the pistons, but they're ok.

i sent the head to the guilty mechanic and told him to replace the valves, seats and guides.

called him today and he said he's only changing the valves. thats when i called my mum...hahaha he's afraid of her! hahaha (don't laugh! you'd be too). now those three things are being changed and it's getting a port and polish too! :P

the guilty one says he's going to pay 50%

what do you guys think???

btw its an SI r33

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/
Share on other sites

I'm guessing the mechanics screwed up the timing belt while doing the water pump, which in turn caused the valves to fail. But I'm no mechanic...

In fact my mechanic friends regularly tell me that I know f**k all about f**k all. (Although when I try to tell them that the double negative in fact implies that I know everything about everything, they won't have a bar of it...).

So someone more knowlegable respond!

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1568168
Share on other sites

so how much will you be out of pocket if you pay 50% each?

if its less than $400 or so, i would say bite the bullet and pay, then stay away from that mechanic!

after all, time is money. after months spent with lawyers and in court, is it going to be worth the stress and hassle? no.

Warren.

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1569458
Share on other sites

You have to take the timing belt off to change the waterpump?? isnt that strange? Most cars arent like that.. waterpump runs off the alternator belt.

Excuse my ignorance (only just got my 'line and havent had a good chance to have a sticky under the bonnet :) )

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1569709
Share on other sites

$400???? more like $1500-$2000. but thats including a port and polish. hahaha. was doing maybe a little bit over 4000rpm. i have pics on my phone but i can get them onto the computer. show the damaged valves & scrapes on top of the pistons.

it feels weird not driving my car. i drive everyday sometimes have 1 day off a week or month. i miss her!!!

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1569769
Share on other sites

If you can prove that it's his fault ( sometimes very hard ) then he should pay fro everything including the tow . If he replaced the timing belt it maybe esier to prove .

If he refuses you can go to fair trading .

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1571107
Share on other sites

Are you sure that is all the damage that was done? Did you ask him if he even looked at the timing belt because if he did and didnt advise you that it was old/worn he is a lame duck anyways. i'd get your scary mum ( mines scary too) to give him another rev or two and try for a better deal.

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1572207
Share on other sites

i hate dodgy mechanics but can forgive anyone for making a mistake as long as they make good 100%

if he's doing anything by way of reparation you're lucky; you're getting something from him, but it also means he accepts liability. this is good for you in case there are more problems or you want to push for more. it's a no brainer but don't piss him off now or you'll get it back in peices. as for the port and polish make sure it's being done by someone good or or it'll be worse than ever.

the dept of fair trading is your friend in this - they can't stand dodgy arseholes any more than i can. he should make good 100% but if you've agreed to the current arrangement then there's probably not much more that you can do. if you have further troubles don't do anything with this guy, call the fair trading people and tell them the whole story. they will manage the negotiation for you - it's worked for me in the past.

at this stage however don't be disappointed, it's still a good outcome.

hope things work out for you

Link to comment
https://www.sau.com.au/forums/topic/86739-who-should-pay/#findComment-1572257
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
×
×
  • Create New...