Jump to content
SAU Community

Recommended Posts

Hey guys,

Am getting my car ready for the next round this weekend at winton and have struck a problem....

The turbo seems to be spooling ok (around14-16psi mark) however it seems to be loosing all the boost just as the turbo is supposed to kick in. So the car accels ok and turbo spools ok upto about 2800rpm but then accel just dies and the car coughs and splutters. I have checked the intercooler and piping for any leaks and can't find any as well as all the other piping.

Prior to this the only problem my car was experiencing was a dead battery.

Any ideas??

Link to comment
https://www.sau.com.au/forums/topic/86870-urgent-help-needed/
Share on other sites

thanks for the replies.....

Paul.....close but not quite ;) It actually runs a Wolf3d. Thing is I have been running the same tune for about a year and 1/2 with no issues so it has to be something that has come up in the last day or so. What actuator are you taking about?

you cant view the knock sensor value cos the wolf doesnt support it does it> would be handy to see if its knocking or doing something crazy. when it comes on does it wind up normally or is it like extra laggy and slower? maybe busted exhaust wheel or a chip in one of the blades, altho hiflow so a bit far fecthed cos the exhaust wheel is brand new

Cheers for your help guys.....after checking the hand controller it seems she was running extremely lean and after checking the fuel press reg it seems the vacuum hose had a split in it. So most likely this will fix the problem but will chuck her on the dyno to check everything out....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...