Jump to content
SAU Community

Recommended Posts

What do you mean by similar in function? The AVC-R controls boost, the SAFC adjusts the air-fuel mix by modifying the volatge signal to the computer. The RSM monitors speed/revs/battery/trip etc, has 0-100km/hr and 0-100m times etc, removes speed cut.

If you mean do they all use the same sort of layout for the commands then yes, all the blue screens work very similarly.

The AVC-R and the SAFC are for performance the RSM is handy but not necessay.

See'ya:burnout:

And some more question related to the S-AFC.. when is the best time to fit in the S-AFC ? example: after installing intake system..

Can someone briefly explain the use of S-AFC? i mean what will this electric system do to ur engine? Thank you Dude..Do you know what i am trying to ask?

i am sorry if i write something you guyz dont understand.. APOLOGIZE.........

Super AFC controls the ratio of air and fuel the car uses, though it doesn't alter ignition. Tuners will try to alter the air/fuel ratio to somewhere 12:1, therefore giving better economy and power. Do a search and there's many threads on the SAFC.

All three have similar monitoring tools, but their main functions are different.

Originally posted by tlai909

Forget the S-AFC, get a PowerFC if you can swing it. The AFC is only a small subset of the functions in a PowerFC.

T.

I wouldn't forget the S-AFC if your budget constraints were tight. The best thing to do would be to save up $700 or so for the S-AFC plus tuning, and when you save up an extra $1500 or so, sell the S-AFC and you should have enough to buy the Power FC and get it tuned.

That's exactly what I'm doing :D Pity that the Power FC isn't the first thing on my list of things to get so it's quite a way off yet :P

Originally posted by JimX

Then why are you looking at the S-AFC?

Well my friend you need to look at the PowerFC Pro + the AVC-R + Hand Controller.

That's probably the fat end of $2,500+ gone.

Or try a HKS F-Con Pro. They are similarly expensive.

You would be hard pressed to buy better at any cost for road cars.

T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
    • Very cool, see what I did there? 🥲 Wild WMI setup, first I've seen where it's on each cylinder runner, usually I see a single jet pre throttle.
×
×
  • Create New...