Jump to content
SAU Community

Stagea Boot Release - Fixed

Abydos

By Abydos,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Abydos Newbie

Abydos

Posted
Posted (edited)

I was wondering if anyone has had this problem before and can help me.

I have a 1998 Stagea and I’m having trouble with the boot being stuck shut

Basically there is a little motor that pulls the boot shut if you don’t close it fully (great idea I have to admit). It has been working fine for the last few months but today I closed the boot and I heard the normal whirring noise it makes to pull it fully shut. But this time it sounded like it jammed. Now I can’t open the boot at all.

I don’t think it’s the lock as I can lock and car and it makes the same clunking noise and the boot release handle goes light. When I unlock and car again (simular clunking noise) the handle is heavy and it feels like it’s moving the parts latch but the boot doesn’t move.

I’m assuming the motor is stuck half way still trying to pull the boot shut or something?

I have put pressure on the boot to try and force it shut (although it looks fully shut) I have looked to see if I can take the inside cover off and check out the parts but the screws are around the inside sill therefore I can’t get to them. The only other thing I have tried is disconnecting the battery to see if it would reset the motor…no joy.

Has anyone had this before (and fixed it) or does anyone have any ideas

Thanks in advance

Edited by Abydos
Link to comment
https://www.sau.com.au/forums/topic/87019-stagea-boot-release-fixed/
Share on other sites
Abydos Newbie

Abydos

Posted
  • Author
Posted

All fixed

FYI for Stagea owners and probally most wagon boot setups:

It ended up being the latch that wasn’t working rather than the motor that pulls the boot shut.

FYI if your looking to pull off the inside cover to the boot, the plastic part that goes around the window (mine is grey) has no screws it just popes in and out. The carpet section has about 8 little screw type things that go around the sill. Assuming you can’t open the boot (like my issue) you can pop off the plastic cover and pull the carpet section back and push down on the latch at the bottom and the boot will open.

Basically there is a metal little arm that pushes down on the lock as you lift the latch. Mine had fallen out and was sitting at the bottom of the door.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • GTSBoy
      New fix for low tyre pressure from bmw

      By GTSBoy · Posted

      You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...