Jump to content
SAU Community

Recommended Posts

don't get any car with a 7M-GE engine! i had an MA70 supra with the 7M-GE and blew 2 headgaskets...

Warren

Apologies for gettting a bit off topic, but how exactly was the headgasket fixed? I blew mine twice aswell, the first time it was done by a 'reputable toyota specialist' that still follows toyota recommendations and didnt use genuine parts.

Second time around i did it all myself and like i said, new bolts + washers torqued to a higher setting, genunine head gasket (redesigned), head surface faced for straightness. After that it never gave me any troubles. The 7M is a strong engine, and quite good for its era (okay, its a pos these days...). :rofl:

Apologies for gettting a bit off topic, but how exactly was the headgasket fixed? I blew mine twice aswell, the first time it was done by a 'reputable toyota specialist' that still follows toyota recommendations and didnt use genuine parts.

Second time around i did it all myself and like i said, new bolts + washers torqued to a higher setting, genunine head gasket (redesigned), head surface faced for straightness. After that it never gave me any troubles. The 7M is a strong engine, and quite good for its era (okay, its a pos these days...).  :huh:

problem was that the headbolts needed to be torqued higher than the factory specs..

i realised this the second time around when i did some searching on the net..

i had many other problems other thand a blown headgasket, thought.. not an engine i would recommend unlike the faithful rb series...

I was looking at a 92-95 Honda Civic Vti. They have a little eye candy, a reliable engine, don't use alot of petrol and seem easy to ensure..

If anyone has any comments on them I would greatly appreciate it.

The CRX is a great little N/A car. With a few simple modifications to extract power they are light and have a bit of go.

Something like a 180SX / S13 with a CA18DET has cheaper insurance than you may think (3rd Party). A friend of mine pays $400 a year for his.

Depending on what you want you could always build up a fast car, sacrificing babe-pulling looks. (Not that a Paseo will).

Perhaps a Datsun 1600 with CA18DET or SR20DET? Bluebird TR-X with SR20DET?

S13 or 180SX suspension can be grafted onto these cars. The 1600 has the advantage of IRS, whereas only the import-spec Bluebirds have this. And are you looking at full comprehension insurance or 3rd Party fire and theft?

It would also be a good idea to factor in that buying a previously modified car would save huge $$$ over buying and modifying a stock car yourself.

Some Examples:

http://www.carsales.com.au/pls/carsales/...rch_distance=25

http://www.carsales.com.au/pls/carsales/...rch_distance=25

http://www.carsales.com.au/pls/carsales/...rch_distance=25

http://antilag.com/forums/showthread.php?t=5087

http://antilag.com/forums/showthread.php?t=5554 (The first car)

http://antilag.com/forums/showthread.php?t=5451

http://www.carsales.com.au/pls/carsales/...rch_distance=25

Hope this helps!

Good Luck in your car choice.

the problem with some of these cars like the S13 is that most of the ones that get to an age have been flogged by p platers for years and the repair bills will cancel out the benifits. good if you can get one if good condition though.......

volvo 240. cheap, old people dont flog them and a good chance of survival in a crash.

n14 sss/q best first cars insurance wise there not to bad but id advise u to only look at aussi spec sss because jap spec sss owners think they got a rare sports car so they jack the prices up all in all there good lil cars powerfull best of all there made by nissan :P

I think i must win in the smallest first car award here :P

I drove a Rover Mini Cooper 1.3i 1993 model....with a 1.3 Litre 4 Cyl engine :)

Sorry mate i get that one! I bought a 91 Charade hatchback 4 months ago while im saving for my R33. It has a 996cc engine (not even a litre) and average petrol for the week is 10-11 bucks! Im even thinking of keeping it when i buy the skyline its so cheap to drive to work.

EDIT : And its a three cylinder lol

Edited by Lukeisbuyinga33

Alot of the aw-11s around are not in good nic. U have to get the supercharged one too or it pointless and as i said before, when the back end comes out there is not a damn thing u can do about it.

Most of the roofs leak and alot of them are thrashed. Not a good cheap car. Oh and have u seen where the filter is!!!! madness.

And ill second that the 7mgte, blows dick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
×
×
  • Create New...