Jump to content
SAU Community

Recommended Posts

haha righto simon, id rather get the thing tested etc, as of when i took the cams out and put stock cams back in, it sounded like it was knocking real bad, but went away once i put a stock computer back in. so ill make sure everythings still alright before i go selling it to anybody.

will also have fmic with piping, stock or HKS 2530 turbo, loom, gearbox etc.

got offered a 240rwkw SR for my ceffy last night, and hes after my RB26 which has done a big end bearing...hmm :wave::D

is that a built SR or stock internals ?

Built = tempting

Stock = Fark off!

this is it here:

SR20DET

Pod Filter

HKS T300 low mount external gate kit

HKS 42mm external wastegate

KAKIMOTO stainless 3 inch catback system

Custom front pipe

APEXI 740cc injectors

Z32 AFM

Wrx injector plugs

Hybrid Front mount intercooler (600x300x70)

TRUST oil cooler

TRUST oil filter relocation kit

TOMEI rocker arm stopper kit

Custom intercooler piping

Dr Drift remapped ECU

Bigger fuel pump

Blitz dual SBC

Greddy catch can

Aftermarket aluminium radiator

PIVOT volt stabilizer/earth wire kit

Twin thermo fans

its out of this car - http://www.nissansilvia.com/forums/Widebod...sx-t175960.html

its tempting of course, but i was set on an RB26 so i still wanna head in that direction.

240 on stock internals with those supporting mods and a GOOD tune (this is the key here) isnt much stress for an SR20 at all... Denzo from JMS made 360 rwkw's on a stock bottomend SR for quite a while (read 3 track days )

but yeah, they sound like shit :wave:

"they sound like shit"

(read TRUCK MOTORS) :O

i just got offered a 32 four door for my cefiro back to stock, thinking about taking up the offer and getting dad to build be a 3 litre bottom end and stick my 26 head on it lol. death wish i know, but cheaper than building a 26 bottom end

"they sound like shit"

(read TRUCK MOTORS) :laugh:

i just got offered a 32 four door for my cefiro back to stock, thinking about taking up the offer and getting dad to build be a 3 litre bottom end and stick my 26 head on it lol. death wish i know, but cheaper than building a 26 bottom end

keep the ceffy!!

keep the ceffy!!

you just want the loom haha :laugh:

not sure what ill do, the 32 has fresh paint, will have stock wheels, the RB20 isnt shitting itself (unlike mine), has an interior (unlike mine), and i get to keep all my good bits off the ceffy ( RB26, 3 core trust radiator, oil cooler, 2530 turbo, boost controller, TT, bucket seat etc) will just chuck in 2 blown RB20s so he can fix it when it finally lunches itself.

got a price of a full rebuild kit for an RB30 bottom end too, 1500 including the crank being balanced etc, forged rods and pistons, headgaskit, block cleaned up etc. then dad can assemble the whole thing (being a mechanic and engine assembler :O ) and then got quoted 700 bucks to get my head sent away to get new guides and all cleaned up. $2200 plus a carton of jim beam and we are in business! have a set of R34 N1s to bolt onto the side, ill build my own exhaust out of stainless and bobs your uncle.

...then i just need a 25 box to stick behind it :)

if i dont swap the ceffy for the 32. ill do the 3 litre anyway and stick it in the ceffy :)

you just want the loom haha :(

not sure what ill do, the 32 has fresh paint, will have stock wheels, the RB20 isnt shitting itself (unlike mine), has an interior (unlike mine), and i get to keep all my good bits off the ceffy ( RB26, 3 core trust radiator, oil cooler, 2530 turbo, boost controller, TT, bucket seat etc) will just chuck in 2 blown RB20s so he can fix it when it finally lunches itself.

got a price of a full rebuild kit for an RB30 bottom end too, 1500 including the crank being balanced etc, forged rods and pistons, headgaskit, block cleaned up etc. then dad can assemble the whole thing (being a mechanic and engine assembler :) ) and then got quoted 700 bucks to get my head sent away to get new guides and all cleaned up. $2200 plus a carton of jim beam and we are in business! have a set of R34 N1s to bolt onto the side, ill build my own exhaust out of stainless and bobs your uncle.

...then i just need a 25 box to stick behind it :)

if i dont swap the ceffy for the 32. ill do the 3 litre anyway and stick it in the ceffy :)

3ltr into ceffy. Dont become another skyline statistic :D

i cant imagine wat a rb30det would be like in a cefiro ..........! seriously good and scary.

hes a pic of mine at a trackday recently ....stock suspension at the time ....body roll central.....was very interesting to drive but quite controlable when the back decide to go....ven when i was asleep ! :(

post-15336-1153797905.jpg

Edited by Resin

i put the interior back in the ceffy this afternoon, makes me wanna keep it even more, looks so clean now lol. was just a shell with a cage and a bucket seat, moaned a groaned when i drove it etc. now its noisy (read - minus sound deadening :rofl: ) but alot more comfortable. ill check this 32 out and see how i go, but whichever i choose its getting a 3 litre RB30DETT (technically it would be an RB31DETT :P )

will see how i go, this 32 is alot cleaner compared to my pig spec ceffy :yes:

i cant imagine wat a rb30det would be like in a cefiro ..........! seriously good and scary.

hes a pic of mine at a trackday recently ....stock suspension at the time ....body roll central.....was very interesting to drive but quite controlable when the back decide to go....ven when i was asleep ! :rofl:

lol nice sleep/drive skills!

Are they meisters ? IF so, what offset are they ?

hmmm no internals + 240kw = tunka tunka tunka (bottom end gone)

Although if ur gonna rebuild the 26, be cheaper to rebuild the sr.

Thats my 2c :(

It's my mate's Dane's car... It's a great car... problem is he never knows what he wants! He did have some Meister's on it just until recently... it really is a very good car! Trust me... it's made an apperence in Speed magazine!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...