Jump to content
SAU Community

Hks2835pros Or Gt3040r

ECR033

By ECR033,
in Engines & Forced Induction

 Share

Recommended Posts

ECR033 Mentor

ECR033

Posted
  • Author
Posted

Al, thanks for the info (only noticed your post today). I did read something a little while ago about someone doing the hiflow with VG30 exh housing and getting good results. I'll look into it as well - and yes, it's also added to my confusion :)

porschephile, definately post up the dyno chart from your friends car if you can - i'd be very interested to have a look. I assume that your friend has the GT2835 with the .87 turbine housing?

Also, just having another look at the Nengun website. They have the 2835's on special for $2,560 delivered to Sydney ;)

One question though, they have 2 versions of the GT2835 with A/R 0.87...one with Strong Actuator attached 80mm diameter and the other with 100mm diametre.

Pardon my ignorance, but what exactly does the actuator do and which choice would be better for my application?

ECR033 Mentor

ECR033

Posted
  • Author
Posted
One question though, they have 2 versions of the GT2835 with A/R 0.87...

One with Strong Actuator attached 80mm diameter and the other with 100mm diametre.

Pardon my ignorance, but what exactly does the actuator do and which choice would be better for my application?

Come on guys - help a novice out :P

Thanks!

LANFOH Experienced

LANFOH

Posted
Posted
Come on guys - help a novice out :P

Thanks!

The wastegate actuator controls the amount of boost that is pushed through the turbo by pushing excess exhaust gases through the wastegate. The harder the spring is the harder it will be to open the wastegate thus controlling boost.

Al Grand Master

Al

Posted
Posted

Not sure which actuator is better, as i am note that technically minded, i usually ask the turbo experts that type of question and allow them to make the decision for me :).

About my combo and your decision, if you could hold off for about 3 weeks i should most definately have a dyno graph to post up. Head has already been sent to be ported, turbo sent to be upgraded, ecu out to be upgraded, cams have arrived, it's all moving quite nicely :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • PranK
      My BMW 335i

      By PranK · Posted

      No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Milkmun
      Cleaning my wheels 😍

      By Milkmun · Posted

      Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...