Jump to content
SAU Community

Urgent! Power Steering Issue

Damo Monster
 Share

Recommended Posts

Damo Monster Enthusiast

Damo Monster

Posted
Posted

Hi there..

In my R32 GTS-t Skyline (1991) I have developed a bit of a problem where the power steering randomly shuts off, along with the HICAS light appearing... No before you all say that its been covered and do a search.. I have searched, and see that others have had this problem, but no one has posted a solution... The thing is, my mechanic (and all the others in town) dont seem to be able to help me... I have checked the fluid level, and its fine.. I dont have an after market steering wheel.. I ran the HICAS diagnostic, and it said that there is an issue with the Speed Sensor and the Gear Selector (its an auto)... the thing that I cant figure is why would it shut the powre steering off for either of these faults? I have had the power steering pump and belts checked, and they're sweet... Also, there is no pattern to it switching off.. it will do it in either a straight line, or a corner, and and any speed... If it was just a light that blinked up, I wouldnt worry.. But I dont want a car that turns off power steering any time it wants.. Things like that can lead to nasty surprises!.. Please help, I'm really not sure what to do next!!

Cheers,

Damian

Link to comment
https://www.sau.com.au/forums/topic/87360-urgent-power-steering-issue/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted

R32s use fluid from the P/S system to operate the HICAS system. So it makes sense that a problem with the HICAS would affect P/S.

If it's random, I'd be looking at a dirty electrical connector.

Sydneykid Grand Master

Sydneykid

Posted
Posted (edited)

The power steering is speed sensitive, that's one of the important inputs to the HICAS ECU.

So the speedo sensor is intermittent, or it might have a bad conection at the ECU, check the speedo cable, they break on R32's regularly. Does the speedo needle jump around at constant speed?

Next would be the gear position indicator, so the HICAS ECU knows what gear it is in. Is the selector sloppy? Or does the selector light flash? How's the gear change?

These are all simple tests that any decent mechanic could do. The diagnostic is telling them what is wrong, then it's a simple matter of working through the usual causes. Don't let the fact that it is a Skyline get in the way of the usual logic, speed sensitive power steering is the same on all cars.

Hope that was of some help

:( cheers :D

Edited by Sydneykid
Damo Monster Enthusiast

Damo Monster

Posted
  • Author
Posted

Hi there..

Yeah I have noticed that over a 100K/ph the needle seems to sticm sometimes, nad then free up as you keep accelerating... but its playing up mostly at 50K, which the needle seems to be fine.. Have also noticed the 100K+ warning chime sounds very sick sometimes, and quite often doesnt come on, or only comes on between 100-110 kph, and never seems to work at 120-160kph... Wonder if that is all related... Have booked the car into a specialist auto electrician in the enarest city as I cannot find any local mechanics who seem to want to know/have any idea... Just hope the auto electrician can fix it (although when I was speaking to him, he reckons it wont be the speed sensor as he said if it was faulty, the speedo would go at all... he seems to thing it will be steering wheel sensors.. which I find hard to believe as it plays up even in a straight line, and I still have the factory m-spec steering wheel)... Anywya, thanks again for the quick replies, and if you think of anything else I can check/do, let me know (its a couple of days before the car goes in, and I'm not looking forward to the bill)...

Cheers,

Damo

Duncan Grand Master

Duncan

Posted
Posted

Well I cna help with one of those things, the speed alarm thingy gives up after a while of nagging you, so maybe by the time you hit 160 on that private rd you have been going over 100 long enough that it gives up.

I left the speed chime in for 1 drive from sydney to goulburn......

Damo Monster Enthusiast

Damo Monster

Posted
  • Author
Posted (edited)
Well I cna help with one of those things, the speed alarm thingy gives up after a while of nagging you, so maybe by the time you hit 160 on that private rd you have been going over 100 long enough that it gives up.

I left the speed chime in for 1 drive from sydney to goulburn......

ha ha.. yes , umm.. private road... anyway, was going to pull the chime out, but when i had a look at the unit it seemed to have two wires rather than one, so wasnt sure which to cut (as the diy i read said there should only be one... but i must admit my nerves had got the better or me by that point so i wasnt looking as well as i could have..).. but that was a few months ago, and this playing up has only been recently, so im sure its not whe i went in there... haveing said that, the dicky chiming and the speedo sticking has always been there...

.. the chime is erratic though.. it only comes on occasionally over 100kph, and always gives up at 110... is that actually normal? sounds quite sick when its going.. no regular tune or anything.. sounds like a dozen old bicycle bells being chucked around in platic bag really...

Edited by Damo Monster
Damo Monster Enthusiast

Damo Monster

Posted
  • Author
Posted

Hi there..

Thought I'd post up the results so that anyone having similar issues might get some ideas... the auto electrician found that a lot of bits had dropped off the pcb in my HICAS computer... he resoldered them all back on, and seems to be fine so far.. If anyone else out there has had similar symptoms, it might pay to get your ecu checked out... he said that it was a combination of old/dry joints and everyday vibration from the vehicle operating...

cheers,

damo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      R32 GTS-t RB30 sedan

      By Lithium · Posted

      To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • Lithium
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Lithium · Posted

      Outstanding!
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...