R34 Front End On A R32?

[Taipan]

Hi

I am thinking of doing something different to my 32 I am going to get some new mags for it (which isn’t really that different). I also been thinking about changing the front end to a R34 front end as a mate sent me a pic of a 32 with a 34 front end on it and I thought it looked sweet as and very tough. And he said it isn’t very hard to do just bolt on but I don’t know. My brother changed the front end on his EXA to a ET front end and that was piece of cake. But yeah I am looking for a price (approximately) to do a mod like this.

Cheers Adrian

[foznice]

bee-r do a kit for this I think. It was in an issue of HPI a few monts ago...

to get this particular kit and to bring it over from japan it will cost MASSIVE dollars.. probably not woth it for a body kit....

[chaos]

you wouldnt have to get it shipped from Bee-r though would you? why not just use R34Gtr Panels etc.

[someonestolecc]

The Bee-R kit is like $10k delivered.

You'd probably be better off custom

[Taipan]

yeh i was thinking more like chaos said and use the panels that is what my bro did with his old exa. And i got the panels bolt stright up.

[Taipan]

so does anyone know what the price would be approximately for a R34 front end inclueding lights, grill, panels and bar

cheers

[nisr32]

either way it is very exy i am doing now so will let you know which way works out cheaper

[inark]

even if u used the panels etc your still looking at a lot of money... plus, then lines wont line up properly from the guards to the doors so ur going to have to fix that... not to mention the massive front end and skinny rear.

[Scooby]

if you're interested there's an R33 GTR with R34 front end on ebay.

[Taipan]

yeh i know i am looking at alot of money but kinda looking for bold point price, hmmmm mayb just keep it shtock looking and mod the engine but pretty keen on doing this convo

[Tosh]

The Bee R kit (front end only) will cost $3500 in Japan + Shipping, Duties and Taxes. But it ONLY comes with the Front Guards, Bonnet and Bumper. No Lights, bumper reo's, radiator supports, headlight brackets etc... which you will more than likely need.

so roughly $5,200 landed ready to sell

R34 Panels and so forth wont be cheap either and as others have said, you will have to modify them to fit the lines of the R32 around the door etc...

Headlights alone cost $590 each for non-Xenon's

I would contact Sam @ G&S Bodyworks about doing the conversion as he has done an R34 front end on a Toyota Soarer recently. 02 9681 2686

[Mr. Oizo]

http://www.garage-13.com/exterior.html

R34 FRONT ON R32 CONVERSION

full kit.

r34 gtt, r34 gtr, beeR kit (pictured) options.

$4499 - R34 GTT

$6300 - BeeR Front only, R34 GTR

$10700 - BeeR Full kit

[lwells]

not to mention the massive front end and skinny rear.

<{POST_SNAPBACK}>

Nice to see I am not the only one who thinks that the Bee-R car looks all out of proportion. Would kill for the Mercury Silver TE37s though.

[Beer Baron]

they aren't TE37s. they are Bee-R rims. also they are 5 spokes TE's are 6 spoke. personally i prefer the five spokes over 6. nice to have an un-even number of spokes i reckon.

[lwells]

they aren't TE37s. they are Bee-R rims. also they are 5 spokes TE's are 6 spoke. personally i prefer the five spokes over 6. nice to have an un-even number of spokes i reckon.

<{POST_SNAPBACK}>

Shutup: your making me look like a fool

[Tosh]

$400 Each for Chrome or $350 Each for Silver/Black

[lwells]

Mmmm... noice. Are they forged or cast?

Might have to get my TE-37s resprayed in that chrome colour.

[Taipan]

hey "SW20-GT" and "darK" thanks that was just what i was after, those were the pics that got me keen on doing this mod hmmm i may b able to make this happen but thinking there could be better things i could spend the money on all though this would still be really awesome to do. R34 front end on a Toyota Soarer dam that would have cost a sh!t load i think that me and my dad would be able to do the labour for the swap of panels and sh!t. But yeh cheers for the prices just what i need to get my brain really thinking

[chaos]

yeh, you should be able to do most of the panels on your own, if you know what your doing, will just cost for the re-spray etc.

[rukus]

id rather save that $10,700 and buy me a real r34 gtr! (when i get the other 90k)