Jump to content
SAU Community

Recommended Posts

The actual bulb part can be bought from dick smiths. I bought some instore and some from their online store. I bought twice because I didn't realise how orange they'd look without the blue caps.

Suffice to say, i'm looking for the blue caps now.

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Read this thread, i'm sure I posted it in here somewhere?

And yeah, it lights up a really bright orange. I thought it'd be like a ceiling globe, but it's not.

With the blue caps? I don't know. I've never seen it. I removed the caps to change my dead globes, but they were melted on and ripped without any real effort.

This is why i'm hunting for the blue silicone globe caps. I replaced the light in the hazzard button, and it had a tiny blue cap on it, but it lights up a really nice white. I'm hoping that's the deal with the AC unit too.

I'll keep you posted here, cause I should be receiving a whole AC unit to stuff around with.

  • 4 weeks later...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

pic shows exact same size, removed second blue cap perfectly with a 'precise screwdriver' smallest flathead in the pack, angled down on globe and slowly slide up to top, few mm each time turning around after each time.

fixed hazard light also with a grain of wheat globe as same size also. much harder to fix tho

pic of globes all fixed aswell

post-23924-1157350768.jpg

post-23924-1157350948.jpg

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too... The right-hand side is what mine used to look like without the blue caps on them.

My hazard button turned out a lot whiter than that...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

Nice one Brad,looks like someone finally got lucky with these bulbs!

70c is what i was hoping for!

So repco is where you got them from??Hopefully the sydney stores will also carry these-im gonna call them now.

Just hoping they are the same size on the 32 as the 33.Im sure they wouldnt have gotten THAT much bigger!!

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too...

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies. ;)

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies.

Not true? I ordered three and got three. Exactly the same size, same length legs, same voltage and wattage. Identical to the dead ones I pulled out.

Since you're so sure of yourself, and because i'm such a blatant liar, i'll stop telling people to go get these globes. =-[

http://dseau.resultspage.com/search.php?p=...amp;isort=score

cookie--monster

i found that the bulbs from dick smiths were too small but right size for the hazard light 'grain of wheat' bulbs. Can get the dash globes from auto elec probably for same price instead of waiting. Measure your bulbs from your current A/C should be 4mm wide and about 8mm high i think. You have the blue caps on the old ones? you get them off alright?

So did you use the same ones for the A/C unit, Brad? I did.. they were identical.

I used smaller ones for the hazard and demister buttons. The smaller ones I got from JayCar, and had yellow pigtails on them. That was the size of the original ones when I pulled them out, so i'm pretty sure i'm correct with the sizes?

yep thats right, the grain of wheat ones with the yellow pigtails i got from dick smiths tho, same thing just different price im gathering, found that the wheat globe cost more than the dash globe. Just an easier way of getting A/C globe thatn ordering from dick smiths online.

nah the ones i got from dick smiths were the grain of wheat globes which i put into my hazard light as tiny. The globes for the A/C light was from repco, this is for a r33 tho i dunno if same globes in 32 or 34s

Not sure how links work here but I found a post of a while ago about how to replace the "grain of wheat" bulbs in the aircon unit.

Hopefully it is shown below. If not, you could always try search.

I read the thread linked by midnight. Have just replaced the bulbs with the "grain of wheat ones from Dick Smith.

Cost was $2.50 for a pair.

1. Take the control unit out

2. Undo the two bulbs with a quarter turn

3. Unwrap the thin wire holding the bulb to the holder that makes the actual "contact"

4. Carefully push a toothpick under the blue condom and roll it around the bulb to separate the rubber from the bulb.

5. Reverse order for new bulbs.

Simple. (Although on the one pictured I left a tiny bit of the blue rubber on the old bulb. I managed to get it off completely intact with the other one.)

Look closely and you can see the wire wrapped around the base of the holder. (This is the replacement globe in place)

Enjoy!

El Bee

Yeppers, I think I was in that post somewhere.

I'm quite quite certain that the "grain of wheat" are the slightly larger globes used in the A/C unit. They have a solid bare wire.

The smaller yellow pigtail globes are for hazard/demister. You have to strip the yellow shielding off, and the wires are stranded.

I have done both, and i'm very sure this is correct. I have just received another second hand A/C unit, all original, with working bulbs and globe caps. They are exactly the same size as the grain of wheat. I suspect that cookie-monster got the wrong globes from Dick Smiths when he asked for "grain of wheat", because the ones I got were the same as the online catalog picture, and identical to what came out of my (unopened) A/C unit.

R33 series 1 and 2 should be the same.

when i asked for grain of wheat globes they gave me the yellow pigtail wire tiny ones at dick smiths, so depends on who you ask i guess, besides the globes i bought were 70c so better than 2.50 for a pair, hardest part is to get the blue cap off. im sure there is enough help here for anyone needing to do it.

Ah right.. if you look on dse.com.au and search for "wheat", it comes up with the correct globe.

So it's a case of mistaken identity when you went in and asked for them.

So the answer still stands. Grain of wheat for A/C, 12v yellow pigtail for hazard/demister.

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Brad, you know the answer to this now, but i'll mention it for everyone else...

The blue silicone cap (stock) takes the orange glow out of the globe, and makes it a VERY light blue.. almost dead white.

When I did the hazard and demister, the demister now lights up a really nice white.

I'm doing up a proper guide for the DIY area with a spare A/C unit I picked up. Complete with what it looks like with and without the cap, how it looks with LED, and whatever other combo's I can think of.

EDIT: I'm also looking into whether the grain of wheat globes come in different wattages, and what the stock ones are roughly rated at. There is no writing on the stock globe.

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...