Jump to content
SAU Community

Recommended Posts

Hey Guys,

My car has been at the exhaust shop for the last 7 days getting the following exhaust system bolted onto my stock GTR:

- 3" Stainless Steel Dumps

- 3" Fabricated Front Pipes

- 3" Mandrel Bent Piping

- 3" Hi-Flo Cat

- 3" Muffler

This is an upgrade from the stock exhaust system which was shagged.

I went for a 3" System because I believed that the low down torque and response would be better than a larger 3.5" sized system. The guys spent a lot of time doing it and there was a few minor setbacks (rusty old exhaust system was hard to get off the turbos etc)

The car sounded pretty good of course, so I jumped in it and the first thing I noticed was the complete lack of power. The thing feels as though its bogging down under full throttle, sure it has an underwhelming amount of life in the 4,000 - 7,000rpm top end, but anything under that and it is hopeless!

The popping is a lot louder and it just seems to be trying a lot harder for bugger all difference in performance.

Can anyone offer some light on my situation?

Link to comment
https://www.sau.com.au/forums/topic/87616-new-3-exhaust-system-no-power/
Share on other sites

Thanks for the suggestions guys, I reset my ECU (unplugged the battery and stabbed the brake pedal several times, then reconnect it) .. mild improvement but still just as powerful as the car was before the exhaust.

The exhaust fitter said he had to slightly customise the dumps to accomodate the o2 sensor.. maybe its that. I'm dropping it back in tomorrow morning.

out of interest what do the custom dumps look like? is there a particular reason you went custom over the available off the shelf dumps? is it possible the new cat is causing a restriction? what type of cat is it?

also have you had the car dyno'd before? if so dyno it now and see what happens.

Also, just out of interest how much was the exhaust? and mild or stainless?

They where off the shelf dumps, and other than the muffler the rest was custom.

Dyno, no, I havent yet. I already can feel a problem with the car, i'd rather take it in when its healthy! which i will do once this problem is sorted.

All up it cost $1700 at mates rates.

Pentae - I have the same sort of modification to my exhaust system except I have 3.5inch back from the cat, but I don't have any aftermarket dumps. I am running 14psi boost and this gave me an extra 60KW at the rears assuming standard is around 170KW. So you should be feeling a big difference! As for below 4000rpm didn't have the chance to drive the standard exhaust system, but mine is pretty sluggish too until i hit boost at about 3500rpm.

yeah, 3.5inch would have been better than 3inch. a smaller exaust will only rob you of performance, it won't give you any advantage in throttle respose or low-down torque.

In N/A's maybe, as backpressure is required, however in turbo's the turbo creates ample backpressure

If you are experiencing lack of power. TAKE IT BACK and tell the guy who installed it all. As they haven't done their job properly if this "upgrade" is giving you poorer performance.

  • 4 weeks later...

i had twin apexi air filters and SS dump pipes and 3in turbo back exhaust fitted to mine

HUGE difference

stock ecu and all that, the with exhaust and intake mods stock boost jumped to 14 psi

and can feel boost about 2700rpm full boost by just before 3500rpm

also i havent dynoed but will have just over 200awkws

so somethings wrong in urs

good luck

RellikZephyr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...