Jump to content
SAU Community

Buying Cars Inter-state


Turbz_13
 Share

Recommended Posts

thats just common sense to have the car checked out prior to purchasing it, no exceptions. compression test/leak down, suspension, body, features ie climate control/radio/indicators - the lot. you never know so my bet is to be safe rather than sorry.

Link to comment
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

well i flew over there any took mine to get a full mechanics check, i just rang some mechanics over there and made a date,but you could always get the good old raa check done. But when spending this kind of amount of money it is definetely worth getting it checked over before purchasing it especially if your not too mechanically sound.

Link to comment
Share on other sites

For the money, I would like to see the car myself before purchasing it. Return airfare isnt that much, and if you can make it a long/dirty weekend away, then it won't really matter if the car is in great condition and you didn't need to go. (however if the car is not up to scratch the cost is well worth it)

Edited by 4door_Sleeper
Link to comment
Share on other sites

  • 2 weeks later...

Hey all

Im thinking of purchasing a 1996 R33 S2 skyline from Vic from a dealer . My plan is to fly up there (one way ticket). Get the car fully inspected etc.

My only consern is driving it bk to adelaide with no insurance...?

Are u able to have insurance on the car prior driving it to SA? I have heard you can have it shipped which would cost $350 or so?

Any u guys have any ideas?

Thanks:)

Link to comment
Share on other sites

Hey all

Im thinking of purchasing a 1996 R33 S2 skyline from Vic from a dealer . My plan is to fly up there (one way ticket). Get the car fully inspected etc.

My only consern is driving it bk to adelaide with no insurance...?

Are u able to have insurance on the car prior driving it to SA? I have heard you can have it shipped which would cost $350 or so?

Any u guys have any ideas?

Thanks:)

Link to comment
Share on other sites

Hey all

Im thinking of purchasing a 1996 R33 S2 skyline from Vic from a dealer . My plan is to fly up there (one way ticket). Get the car fully inspected etc.

My only consern is driving it bk to adelaide with no insurance...?

Are u able to have insurance on the car prior driving it to SA? I have heard you can have it shipped which would cost $350 or so?

Any u guys have any ideas?

Thanks:)

Link to comment
Share on other sites

Yeah you can get insurance i had already organised it all with just cars and when the car arrived here (with no plates) i got my permit for it and rang them up and told them the details of it and then i could drive it insured till the plates arrived. So you should be able to ring them when you get it and give them the rego and it should all be good.

Link to comment
Share on other sites

Yeah you can get insurance i had already organised it all with just cars and when the car arrived here (with no plates) i got my permit for it and rang them up and told them the details of it and then i could drive it insured till the plates arrived. So you should be able to ring them when you get it and give them the rego and it should all be good.

Link to comment
Share on other sites

im actually having a bit of trouble transfering the rego over, as the car come into australia under the 15yo rule there was no plate given. and the cop told me that he wouldnt finish the identity check and said i would have to go to regancy for an "exempt for complance" plate. but this was a cop from a country police station(clueless)

Link to comment
Share on other sites

That's exactly what happened to me when I brought my car over from Vic. I didnt have that plate either. You have to go to regency and fill out some application for exemption then after youve got that in the post like a couple weeks later, you can take it down for a full roadworthy, a 1 hr session. Book a regency appointment tomorrow and buckle up cos you'll be waiting on hold for a good while if you are as lucky as me and I had a sweet 4 week wait for the next appointment too! Make your car stock as a rock and if you're lucky it'll go through first time. Not sure if you can avoid the roadworthy if you're living in the country.

Link to comment
Share on other sites

Thanks for the reply,

Yeh the car im buying is already complied, so just call up Just car insurance while im in Vic then gimme them car details etc. and when i get the rego transferred from VIC to SA give them a call bk?

Is this correct? Did u guys drive ur skylines bk to adelaide(long 8-10Hour drive) or have it transported via ship/truck??

Feed bk be greatly appreciated:)

Link to comment
Share on other sites

Drive it back but just tell Just cars exactly what you want to do and you can set up the insurance and then as soon as you buy the car you can ring them up and the insurance will cover you.

As if you wouldnt want to drive the new car back...I had to fight my old man to get him out of my GTR and back into his new monaro after he took it for a bit of flex driving back to adelaide!!!

Link to comment
Share on other sites

I just bought my car from NSW, the only thing I have to add is that you will have to put your car over the pit to get the rego transferred over to SA within one month after you buy it. (assuming that its still got rego)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...