Jump to content
SAU Community

Car Wash Places


R32Skyliner
 Share

Recommended Posts

I heard that there is somewhere you can drive your car up onto a big ramp or something and get underneath so you can have a go at it with a high pressure hose. Although I'm thinking the driveway idea might be the best option as I have a steep drive, just have to get a hold of some ramps.

Link to comment
Share on other sites

I find there is usually a way to have the front end of the car hanging over the steep part of the driveway as most of them have a flat part and a ramp part. Put ure wheel just over the crest and then reverse it to get to the other half.

Make sure u chock the wheels so u dont get squashed though. Just in case ure park brake fails by some evil magics.

Link to comment
Share on other sites

Go to supercheap or some place similar. Buy a can of degreaser (worth next to nothing) spray tons of it all over the car where oil needs to be taken off. Then hit it with a high pressure spray from your local car lovers.

Done

Link to comment
Share on other sites

hummmm, alot of jacks and 4 stands, degreaser and high pressure, wouldnt be any other way to do it "cleanly" done it to mine, just the front half though, have no idea where to jack it up from the centre at the rears. (gives u about 400g of weight reduction :))

Link to comment
Share on other sites

Thanks for all the ideas guys and Rob for the offer of the ramps. I ended up borrowing some ramps off a mate who lives nearby and used our slanted driveway to get under the car. Already have a high pressure hose and some degreaser, so was able to give it a good clean. Didn't realise that some areas under there are actually grey, not black!! Anyway, came up well, so I'd recommend this technique for anyone doing the same.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Pretty simple question. I was about to put the transmission back in and thought I pretty much had it lined up when I noticed it seems like the pressure plate isn't flat. I was pretty careful when undoing the bolts both during initial disassembly for cleaning and when torquing them up for installation so this is pretty discouraging. I'm not sure if I accidentally bumped the pressure plate with the input shaft and bent it somehow or if it just showed up this way. Is it possible that there's just something obvious I'm not doing correctly? I'm pretty sure I was extremely careful to make sure the friction discs were seated correctly in the hub, everything lined up, flywheel torqued according to sequence, the little springs all sitting correctly in their seats, etc.  What's the play here? Do I jump straight to a new pressure plate?
    • OK. I can see that being the case. But if you live in the land of "only switching between 4.08, 4.11, 4.36" like most Skyliners, then you never encounter it. Now I perhaps understand why the crownwheel is thicker on some of the smaller numerical ratio diffs. The two stubs being the same (unequal) lengths and just swapped side to side between the different cases is a new one to me. I'm hating Nissan R200s more than ever now.
    • Reason I say this is I have seen broken ones, in drift, drag and even behind a stock Z. I do appreciate most of the time its the synchro's that go.   Trouble with quoting HP is it doesn't really say how strong the box is.  I've not seen many CD00X box's make it past a mid 9(150mph) I have seen about a stock R33 RB25 box's run a 9 too, they all go boom at some point though.   Another clue is they make gearsets for CD00X box's too, wouldn't be a market if they didn't break or have a limit people are going past.   I totally agree it is a strong box, just have to weigh up the true total cost of the conversion vs rebuilding with a good gearset. 
    • What makes you say CD009 boxes are not as strong as you would think? I've always been told the last revision (CD00A) is good for 1000whp and I have no issue's believing it when comparing one side by side with an RB25 box. Makes them look tiny. 
    • I picked up an open Center with shafts. I was told the Open shafts will fit a mechanical LSD and looking at them. I think they will work. Will update 
×
×
  • Create New...