Jump to content
SAU Community

Recommended Posts

well as ur turbo is made up of different materials, its good to let it cool with a turbo timer, to keep oil / water flowing thru, since even under actual boost your turbo still spins at quite a few thousand rpm, tho nothing compared to the 40,000 plus rpm of boost..

Turbo's tend to not start making boost until they are spinning at 20,000rpms..

main use for the turbo timer is if you've been driving on boost for a long duration of time, the heat generated by the turbo is huge..

if you than pull up.. stop the car.. turn it off and walk away it has to disipate the heat somehow.. it's meant to stop the oil from sitting in the turbo and causing some side effects, not exactly sure what they are but when your driving you constantly have a cool air flow going past the turbo.. Think it's heat soak in the oil - can have bad sideeffects..

As for legalities - they are not legal in N.S.W. - main reason for this is a) it's illegal to leave a car running while you are not within the vehicle and B) in the case of an accident, if you have a turbo timer when the car crashes the engine/power will not shut off straight away which could either keep the engine running or the power which could cause further injury.

Before you complain - I have a turbo timer in my car which doubles as a boost gauge.. quite useful..

also - to answer your question - most turbo timers that automatically pick a duration to stay on go on how long you've been on boost for.. if it's >0 vacuum it will start adding time to the count.. mine frequently gets up to 20+secs which really would only matter if I turned off the car then and there..

  • 3 weeks later...

I went tru pit twice with HKS BOV and Turbo time...and passed...of course I disconnect the BOV so when the pit guys drive does muted sound...I think Turbo timers are Legal in W.A. ....the pit guys did not give any comment on it...

...that would be because race tracks are private property and you dont have to obey the same rules that you do on the road.... otherwise there would be a policeman up the end of each straight with a hair dryer :D

Unless you're planning on doing trackwork, timers are mostly used for wank factor.

I mean, think about it, if there was a real need for one, manufacturers would have taken that into consideration.

The temperatures achieved with normal or even "spirited" street driving aren't dangerous enough to cause any damage to the turbo. (Unless you have cooling issues)

....but this isn't the case here, so back on topic  :D

There is a thread covering this topic in NA performance which can be found here

Also be made aware that turbo timers are not legal in all states.  B)

That's not always the case.....

Manufacturers don't include turbo timers in the cars to save costs. Anyone that's owned a WRX would know this.... Manufacturers always put a warning in inside the cabin to say that if the car has been driven hard or done alot of freeway driving, to let it idle for 30 sec ~ 2 mins to let the car cool down before shutting it off. WRX's have them as a sticker near the drivers door latch. My MR2 had it written on the underside of the sun visor along with other warnings.

The temperatures achieved with normal or even "spirited" street driving aren't dangerous enough to cause any damage to the turbo. (Unless you have cooling issues)

Therefore this statement isnt necessarily correct. The temperatures achieved ARE dangerous enough to cause damage to the turbo and hence why there is a warning inside the car to tell you to cool it down.

Turbo Timers are essentially a little convenience IMHO. It lets the car cool down while you can lock it and go on about your business, negating the need for you to sit in the car while it idles for a couple of minutes (which can seem like an eternity when you're in a hurry).

Having said that, Subaru in particular (and I'm sure other manufacturers) have developed a system to cool the turbo down properly when the car is shut off. It keeps pumping water and oil through the turbo to sufficiently cool it down before completely shutting off. This was first introduced on the Liberty B4 and allows you to shut the car off immediately without fear of damaging your turbo and without the need to install a turbo timer in the vehicle.

Hope this has helped :O

Having said that, Subaru in particular (and I'm sure other manufacturers) have developed a system to cool the turbo down properly when the car is shut off. It keeps pumping water and oil through the turbo to sufficiently cool it down before completely shutting off. This was first introduced on the Liberty B4 and allows you to shut the car off immediately without fear of damaging your turbo and without the need to install a turbo timer in the vehicle.

Hope this has helped :D

You would think that other car companies would or should be using technology similar to this. Sounds like the perfect invention to look after your turbo and also keep the car legal.

If Subaru put this in the B4 then why didn't they put it in the WRX? Is it in the STi?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...