Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Well Steve's brief description of it to me was that I have a very lean patch right in the middle but once you push through that in the high rpm the afr maps almost perfectly....

But if it was just chipped in japan would adding the intercooler and boost control cause the mapping to be inaccurate???

I am going to find out these mysteries soon though as I need a service.... In high RPM running high boost I am starting to notice that the power is retarding.... its hard to explain but it sometimes cough's and splutters a bit but only under high rpm with high boost....

I plan to get the general service done, that problem looked into, try to unlock the mysteries of my car and get the rust cut out of the wheel arch in the near future :D

Originally posted by MrGTST

Yeah I will drop it off to SST when I pick the shirt up then....

Don't forget Paul.... I too have a stock turbo ( as far as I am aware ;) ) and I got 285rwhp... I am not too far away from you :D

I'll buy you and Paul a pretty pink dress each then.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hey all, I'm sorry if this has been discussed before.  I have a 2008 Japanese import V36 coupe with nav but without Bose. I bought one of those AliExpress android screens, which for the most part works really well.  The only thing that doesn't work is the air con controls (well sort of) and the factory reverse camera.  The AC can be controlled fine but it doesn't report the change in temp and mode to the screen, and the volume knob/other audio controls from the panel don't register on the learning app.  I am pretty certain that the problem is the difference in the head unit between base model (Nav but no Bose) 2007-2009 coupes and anything after 2009.  Mine is the one with the blue connector all the way to the right as seen in this forum post:  The reason I think this is there is one wire left over that doesn't fit anywhere on this head unit, or in the factory screen which also uses different connectors to more recent versions.  I've seen the upgrade from OWC, and have sent the guy a message on eBay but no response yet.  I also don't particularly need the whole kit, just *maybe* an adapter for this one cable.  Did anyone else here have the same problem, or have any insight about what I can do to get this working?  I have been in contact with the seller but all they seem to be able to do is ask for more pictures and videos. Minor edit to add:  I have been researching and found a screen on Aliexpress that actually specifies my head unit in the listing, so these things do exist.  I will contact the seller to see if the wiring adapters are interchangeable with other screens.   Thanks in advance!
    • Can't go wrong with tourings/estates/wagons. 
    • Oh poop ! I missed the "deposit" in your post ! 
    • I laughed so hard a snot bubble popped out my nose !  And seriously ! You can still buy a decent house in Western Sydney for 2 mill ? ? 
    • Come on guys, they're just trying to sell their project car to scrape together a house deposit in the Western Suburbs of Sydney...
×
×
  • Create New...