Jump to content
SAU Community

Recommended Posts

  • Replies 103.8k
  • Created
  • Last Reply

Top Posters In This Topic

  • GTS-t VSPEC

    20904

  • Nizmo

    13582

  • SHUTO-BOY

    6636

  • skyzerr33

    5353

Originally posted by Micko

What you talkin bout Willis?

Joe - don't worry about the money until I give you the DVD player.

Shuto - call me a wuss but I don't bother racing cos I don't wanna risk breaking something on a 400m straight bit of road - kinda not what my car is meant for.

Bussiness is bussiness... I just want to make sure that :) cool Thanks Micko :)

True... GTR isnt for straight road... Its for turning tight corners...:) yes drifting...

What's point having 11 sec car if you cant even go to deli to pick up Milk! :D

Originally posted by macka

Kenny u have a way with words....]

U must of swept your misses off her feet with similar sweet nothings

cheers

mac :D

Awwww you glib tongued c*nt you.

Is that the sort of words you mean?:)

Cheers

engrish mahster

Ken

Originally posted by Pva_Glue

Bussiness is bussiness... I just want to make sure that :) cool Thanks Micko :)

True... GTR isnt for straight road... Its for turning tight corners...:) yes drifting...  

What's point having 11 sec car if you cant even go to deli to pick up Milk! :D

yea , specially cos Milk is in the eastern states.

Cheers

Ken

Originally posted by skyzerr33

she saw u the other day

and another gunmetal R32 GTR the day b4 that

Yep , gunmetal grey GTR's are like bums

everyone has got one.:D

Hell , I've had three

Cheers

Ken

Originally posted by gtrken

Joe , joe  , joe. You don't absorb much do you ?

R33 GTR's will not be avaliable for compliance for some time as no one has the plates for them yet due to the rule change on May 7TH

Cheers

Ken

damm it! ohh well I have other things absorb such as how TCA cycle or kerb cycle in glyconeogenesis and glycolysis.

this is where you comes in :D you are the expert so I ask you :) hehehe :)

cheers

Joe

Originally posted by skyzerr33

oh and macka u was 100% correct with the +ve wire on the cig lighter cheers :)

hooked the ground up ontop of the gear box :)

Gee , and we all thought he was TOTALLY useless.:D

Cheers

Ken

Originally posted by Pva_Glue

damm it! ohh well I have other things absorb such as how TCA cycle or kerb cycle in glyconeogenesis and glycolysis.

this is where you comes in :D you are the expert so I ask you :) hehehe :)

cheers

Joe

WHAT !! ??

on glyconeoene... , glyconeegee... , gliko.. ahh ****

I can't even say it:D

Cheers

Ken

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Jap premium will be 100 RON. You should use 98.
    • The exhaust gases are at their highest temperature as they leave the exhaust port and enter the manifold. They cool as they flow through the manifold because they transfer heat to the manifold and the manifold loses heat to the surrounding environment. Thus, inevitably, the exhaust gases are cooler as they enter the turbo compared to when they entered the exhaust manifold. So, yes, the exhaust manifold can easily get as hot as the turbine housing. Having said that, you will generally see the highest temperatures where the exhaust gases have to slow down or they are concentrated into one area - which is usually the collector on the manifold and in the turbine housing, because the gases slam into the metal at those places, increasing the convective heat transfer coefficient and transferring even more heat to the metal than they might just flowing past elsewhere. Exhaust manifold heat shields are a good idea - certainly for the stock manifold they are there from the factory. People seldom have anything like that on a tubular manifold because they are hard to achieve. Some might wrap a tube manifold with fibreglass tape - but this has a reputation of leading to cracked welds. The best case is generally to put ceramic coating onto the manifold to prevent it getting as hot (internal coating) and radiating/convecting heat into the bay (external coating). All the real heat from a turbo comes from the exhaust side. The gases entering are at ~800-900°C and the steel/iron gets nearly that hot. The compressor side is only going to heat the charge air up to <<200°C (typically not much more than 100°C). So that's nothing, by comparison. The compressor is not a significant source of engine bay heat.
    • Late to the party, specifically joined this forum as I just bought one of these and this thread has been a gold mine of info. If the OP is still around, mind if I ask what gas you been putting in yours? Mine has a Japanese sticker in the cap saying premium but it seems to get way worse mileage on premium (95) than 91. I always thought it was meant to be the other way round🤷 I do think Nissans claimed "6l/100km" is a bit fantastical 😂
    • Does exhaust manifold get hot as turno exhuast side? I have a turbo cover to managr heat in the engine bay but  nothing is covering the exhaust manifold before turbo   i know as turbo does compress air, the temp does go up however does that mean exhaust manifold would be as hot?
    • It's excellent but I'm still breaking it in so I'm not 100% sure where it'll end up. I would say it's about 15% heavier than stock and the smoothness of the slip zone is quite progressive but you need to be a little patient compared to stock or it'll bite hard and stall. Stock I got away with absolutely horrid clutch control. Like I said before I couldn't even tell where the clutch would grab when it was stock so releasing way too quickly without enough revs it would just slip and the revs would drop lower than ideal but that would be the end of it. Currently there's a bit of a nasty clutch judder if I don't apply enough revs + find the exact wrong point of the slip point in the clutch pedal but it feels like it's slowly resolving as I drive it more. I would not recommend the competition clutch unless you really need the extra clamp force. I think this clutch combined with the Nismo operating cylinder is going to be exactly what I want. Enough bite that you need to remember the release point to avoid stalling or rough shifts, but progressive enough that it's not hard to drive by any means and not heavy at all. I tried a "super single" clutch on my friend's 997.2 Turbo 6MT and that was absolutely horrid. It runs an electrohydraulic power steering pump for the clutch power boost so there's zero feedback in the clutch pedal and there was a horrific clutch shudder well after break-in due to the lack of marcel springs or hub springs in the friction disk. It felt like the slip zone was the thickness of a single toe twitch as well so it was almost impossible to avoid stalling it unless you gave it a ton of revs and just dumped the clutch instead of trying to be smooth with it. I was terrified of pulling out in front of traffic. I have also tried some kind of "super single" on an EK9 and that makes this twin plate Coppermix look like a stock clutch. Releasing the clutch pedal even slightly too quickly feels like you're getting rear-ended. The pedal is extremely heavy as well and there's no vacuum assist like the GTR.
×
×
  • Create New...