Jump to content
SAU Community

Recommended Posts

Hey,

I own an SI R33 and have the standard seats. Now im 6 foot and have the seat all the way back and the seat almost vertical so as to be close to the wheel to help judge the corners better. Driving it hard my left foot is still cramped and its hard to let the clutch out all the way. Now i was thinking about getting some racing seats and wanted to know how low do the actually make the driving position? Has anyone else had this problem and has a similar prefrence in driving position? -- Whats the best solution?

If only the bloody steering wheel was adjustable it would all be good! :(

Thanks

-Dan

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/
Share on other sites

What you mean by adjustable? My wheel adjusts up and down. You can buy a spacer to extend the reach.

Regarding racing seat, your only choice is to get a fixed bucket with fixed rails that mount on the sides of the seats. Any other combo will sit you close to standard height, making the project a waste of money.

These seats are legal as long as you passenger seat operates as std (ie: not fixed bucket), or you remove your rear seats and rego the car as a 2 seater.

Do you have a sunroof? As i am also 6" and have no problem with seating position, but my head is close to the roof lining. My car does not have a sunroof.

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1598214
Share on other sites

Thanks Al.

Yeah the spacer would probably be the way to go. The buckets will add more support though so in time i mite invest in that.

Nah no sunroof but headroom is not tht much of a prob. ... my clutch is on its way out and it picks up late in the pedal travel, thts why its so annoying.

Are the spacers easy to install? How much do they usually set u back?

-Dan

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1598323
Share on other sites

Iam 6'3 and I haven't had any problems with driving, but put racing seats into the car and as the floor pan isn't totaly flat. The seat sits a little higher that the standard ones now, and they are nice fitting race seat, I can see a little bit more of the road but my legs have come closer to the stearing wheel but still no problems!

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1598659
Share on other sites

Aftermarket wheel only champ. It's basically just a 2" long machined aluminium tube flanged & drilled at both ends to mate between boss & wheel. drilled for Momo & Sparco pattern both ends. Also the black flexi rubber tube that comes with aftermarket bosses slips over it perfectly. If you have/can find a spare one, no hassles from Mr Plod.

http://www.sparcousa.com/psteering_acc.asp?id=380

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1605992
Share on other sites

Aftermarket wheel only champ. It's basically just a 2" long machined aluminium tube flanged & drilled at both ends to mate between boss & wheel. drilled for Momo & Sparco pattern both ends. Also the black flexi rubber tube that comes with aftermarket bosses slips over it perfectly. If you have/can find a spare one, no hassles from Mr Plod.

http://www.sparcousa.com/psteering_acc.asp?id=380

Thanks champ, too bad I cannot afford a aftermarket wheel at the moment.

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1605994
Share on other sites

I have a similar problem with my knees hitting the steering wheel... It makes it hard to heal & toe.

I'm the exact same with my knees on the steering wheel and i'm not that tall (but I like to sit upright in a car)

Really annoys me and the steering wheel is up as high as it will go (which isn't that high really)

Link to comment
https://www.sau.com.au/forums/topic/88523-driving-position/#findComment-1606008
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...