Jump to content
SAU Community

340kw At The Wheels On Gt-ss Turbo's

600hp

By 600hp,
in Engines & Forced Induction

 Share

Recommended Posts

600hp Proficient

600hp

Posted
Posted

Hi guys, just made 340AWKW at CRD today with our street exhaust.

I have yet to see the Dyno graph but jim said the car made more low end about the same mid range and more top end with the JUN plenum and QF45 throttle body.

tomorrow i'm going over to but the 4"exhaust on and then we will do another power run and just check it over to make sure everything is ok!

Last time the race exhaust made another 30AWKW on top, with out any tuning.

I'll post up again later to tell you how it all goes.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/88735-340kw-at-the-wheels-on-gt-ss-turbos/
Share on other sites
600hp Proficient

600hp

Posted
  • Author
Posted

Hi,

we ran the car up again with the 4" exhaust today.

we made another 20AWKW =360AWKW

I beleive the problem is now that the airbox we had made(which is designed for max power with the headlight out).Could now be starving the car of air with the head light in.

The car is pretty mad to drive!

The next mods to the car with be a new intercooler and a fibreglass funnel to the airbox from where the head light is.

A BIG thanks goes out to Jim and the gang at Croydon Racing Developments for the great job tuning the car .

Another reason for not making more power with the big exhaust is that the turbo's can't keep the pressure up with the new plenum.

I would like to try a set of GT-RS turbo's on the car.

I think that the good old GT-SS turbo's are pretty much out of puff!!

we'll see what has to be done to make some more power down low.

Cheers

StageZilla Rising Star

StageZilla

Posted
Posted
Sorry i forgot to add that was on 22psi down to 21psi andf running BP 98.

shit so thats 612hp at all fours or am i mis-calculating :)

i dont doubt the figure i just wondered if i worked it out right and damn thats impressive numbers for little low mounts :D

good luck

Brad

600hp Proficient

600hp

Posted
  • Author
Posted

Sorry that's not right.

22>21 made 340AWKWs quite exhaust

22>21 made 355awkws big exhaust.

27 psi made 360big exhaust

as you can see the turbos are out of puff by then anyway.

I'm not sure how much that is at the wheels in HP.

Again thanks to the Guys at CRD!

Merli Grand Master

Merli

Posted
Posted

Congratulations :D

Looks like Jim is definitely on top of these GT-SS turbos :O

What are you plans for the car? I wouldn't put a pair of GT-RS on a stock capacity RB26 if I were you. The car won't be anywhere NEAR as fun to drive.

Full mod list?

Merli Grand Master

Merli

Posted
Posted
i belive this car runs a JUN 2.7lt strocker and JUN plenum i would like to see what GTRS can do

I'm not quite sure what an extra 100cc would do in spooling up the GT-RS, but I'm interested to see if 600hp is willing to take the chance and show us :D

All the UK tuners (who have been testing with the GT-RS's for the last 3 years) readily agree that you need at LEAST a 2.8 stroker or preferably a 3.0 OS Giken kit to get the GT-RS's to spool early enough for a road car.

Cubes Grand Master

Cubes

Posted
Posted (edited)

From what I've noticed building a 3ltr then comparing it to the 2.5 and 2ltr, it appears for every 500cc increase you improve spool by ~600rpm.

Its the torque that makes the biggest difference.

Edited by Cubes
discopotato03 Grand Master

discopotato03

Posted
Posted

I don't really understand the following that these GTRS's have on an RB26 , I cant see the point of extra capacity to excite turbo's that are so so to start with . 2530's would have far better response than GT-RS's (GT2871 52 trim's) so what gives ? If someone went to the same lengths with these turbo's (2530) as WilliamsF1 did with GT-SS's surely the torque at the wheels would be adequate and very progressive . I think Gary mentioned some good times with them but cant I remember the numbers .

Cheers A .

pnblight Mentor

pnblight

Posted
Posted

Hows it going 600hp

Do you think you have found the limit of the GT-SS

at the 360awkw? (great effort by the way)

I hate it when people talk what boost by when (cos it really has no relationship to power and torque) But i would be interested to see the torque curve you achieved as to me it's the most important thing as it's what drop you back in the seat and keeps you there lol.

pete

ps great to see you posting results again cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Ball bearing turbos

      By GTSBoy · Posted

      The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • sunsetR33
      Ball bearing turbos

      By sunsetR33 · Posted

      Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...