Jump to content
SAU Community

Suspension/handling Specialists....


Recommended Posts

Hi..i'm wondering if anyone can recommend workshops and mechanics who know their stuff on fitting and setting suspension and handling setups, i.e coilovers, camber,castor, toe fitting and settings, for skylines?

Anywhere within about 30kms of brisbane.

Any info will be greatly appreciated~

Thanx~~

Link to comment
https://www.sau.com.au/forums/topic/88958-suspensionhandling-specialists/
Share on other sites

i won't be using mercury again for any of my work, but each to their own. However, if you do use them, get someone independant to check after they're finished

I use Shaun at Goodyear Strathpine... great guy and pretty switched on, does top work etc.. he races an Evo in some form of rally so he know a bit about what he's talking about :D They're also a Fulcrum Queensland dealer.

Thanx people fer all the info...fulcrum? do they do tests on used coilovers? im basically getting a set of used coilovers and wanna run a test on their usability, and also if there is any leakage and other problems before buying and installing them at the same time. Will these tests be expensive if they are available?

Murcury are not suspension specalists, they get all their alligment / set up work done down the road at fulcurm, they are quite happy to fit suspension parts though. In my opinion it would be better just to go to fulcurm in the first place.

Accurate suspension. Timms court :)

They seem to do good work, just I think you need to say I want this. Not ask them what you need.

Other than that try and track down Scotty, I think hes over redlands way now.

Murcury are not suspension specalists, they get all their alligment / set up work done down the road at fulcurm, they are quite happy to fit suspension parts though. In my opinion it would be better just to go to fulcurm in the first place.

Actually they go to quickfit on enoggera road (the one next to the mobil).

Or how about www.shockreco.com.au. They can rebuild anything. I had my standard struts rebuilt 2 weeks ago and couldn't be happier with their work.

-rb25

Not since Scotty left, I wouldnt go back there.

Not knocking their work, but hold on to that reciept, and check those shocks on the 29th day after the work was compleated. Rebuilt coilovers apparently only have a 30day warrenty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...