Jump to content
SAU Community

Recommended Posts

Hi guys, it seems there's a bit of interest in the Cyberstork gauges, so after a bit of correspondence with them I'm organising a group buy for them, for sets that include an SAU logo.

Here is a sample of the gauges and what they look like:

R32 GTR:

gtr-32-01.jpg

Stagea:

stagea-wgnc34-01.jpg

R33 GTR (this is how you will recieve the covers):

gtr-33-w1.jpg

All gauges will have an SAU logo on them, unlike the ones sold by other resellers locally. Installation is relatively easy, with instructions for each and every model available. Please note that this is a thin semi transparent film that allows light through (NOT an EL or reverse EL sheet), and is intended to sit on top of your existing gauge's dial. The thickness of the film is such that the needle should pass over it easily (unlike some aftermarket EL gauges).

Gauge markings come in an option of two colours Blue and Red, you have to pick one of the two when choosing your dial. Blue markings show up better on cars with blue/green backlight (ie almost all nissans) and red ones show up better in yellow/orange/red backlights.

The following dial colour options are also available (but will cost around $20 more per option chosen):

1. Grey, Green, Orange, Pink, Light-blue, and Purple

2. On applicable models - coloured needle cover (some models have clear needles, that can take a coloured vinyl, like 180sx's).

The dials are translucent, ie they let some light through, which means if you use it in combination with an unmarked EL sheet, you'll get the same effect as a expensive EL gauge set. You can also use higher brightness LEDs in your gauges and coloured backlights to create special effects. The durfaces are mildly UV reactive as well, so if you were to point a couple of UV lights at your gauges they will glow.

The following models (that are relevant to SAU members) are available:

Stagea WGC34/WGNC34 1996 - 1998

Stagea WGC34/WGNC34 1998 - 2001

180sx series 1, transitional and series 2

Silvia S13, S14, S14a, S15

Skyline R32 Series 1 - HCR32 (ie GTE, GTS, GTSt), HNR32 (GTS4)

Skyline R32 Series 2 - HCR32

Skyline R33 GTS, GTS25t

Skyline R32, R33 GTR

and the R34 V Spec GTR

we can order toyota's, subarus and anything else cyberstork make gauge covers for... check here to see if your model is catered for:

Nissan: http://www.cyberstork.com/items/nissan.html

Toyota: http://www.cyberstork.com/items/toyota.html

Honda: http://www.cyberstork.com/items/honda.html

All others: http://www.cyberstork.com/items/other.html

when you post in this thread to regster your interest you HAVE to include the following:

  • Your name
  • The model of car - for example, if you have a R32 GTSt you will say "1992 HCR32 GTSt", and if you have a 180sx, you will say "1992 RPS13 180sx"
  • Options wanted
  • Any other details which you think will help expediate the process
  • I may depending on the response, get a batch done with Super Fun Happy Sliders and Team Wang Racing logos as well. (I won't be doing any other logos, so don't ask.) Please note in your response which of the three logos you are interested in, so I can keep track of interest.

Also looking forward to hearing any thoughts and questions you guys may have on these gauges covers.

The cost is estimated to be around $125 (depending on the number of units we get) plus postage (which should be around $10 at most within Australia). This may become cheaper the more we order. Any profit made will go towards the forums (we expect to make $2 - $5 per dial). Payment is upfront and once everyone has paid we will make an order. If there is an overwhelming response, orders will be done in batches.

Keep in mind these are covers for your gauges, not replacements, they DO NOT include gauges and mechanicals. Also, even though it is cheaper without the SAU logo, they are not as cool :D If you want to just get generic ones from cyberstork with no SAU logo, then please do not post here, as this group buy is ONLY for ones with the SAU logo.

As per the first post:

All of them will say SAU, if you don't want an SAU logo then buy em through a reseller.

In your reply, make a note if you're interested in the SFHS logo or Wang-R logo instead of the SAU logo instead, if there is a large enough interest I'll do a special order for those who are interested in them (no other logos will be entertained).

Hi,

I don't know alot about the dash of my car due to never needing to look around in there :D

If i was to buy one of these what else would be needed to actually install them ?

Or can you use the rest of the parts from your existing dash ?

you don't need any extra parts as such, just take out your cluster, slip the white face over the existing dials and reassemble. You'll need a stanley knife to cut out the faces though.

Although while you're at it you might wanna upgrade the lights in your cluster to something more colourful n stuff, but that's totally up to you.

Chris, is that for reverse EL gauges with SAU logo that light up in a colour other than metrosexual cyan or pink? :D

anyways, pics on an R32:

17.jpg

depending on what you do with the backlights:

with blue bulbs in the cluster (pretty eeasy swap):

147-2.jpg

with UV lights from the front:

143-2.jpg

red backlights:

137-2.jpg

with an EL backing

118-2.jpg

on a regular cluster it decreases the light by about maybe 5%

Hey Shane, i've got the nismo 260 and that shouldlnt matter right since this is only clear film?

Also can you shed some light about upgrade instrument lights while we're at it? Like which, where and do we have a pic of them white gauges at night?

Cheers

So what would the cost be for

White faced dials for S1 Stagea (97)

+ However many high brightness LED's there are in blue like in http://www.kumazon.com/cyberstork/customize/upimg/147-2.jpg

(i believe its four)

im pretty damn interested, want to get these ASAP coz i find my dash to be pretty damn dim...

Man, these look interesting...do a certain amount have to order one for it to go ahead?

how many sales do you need for the price to be $125?

are they easy enough to install?

do you think I ve asked enough questions yest?.... :angry:

The R34 GTR has 1-2-3000 rpm close together and enlarge RPM for the remaining....

If chuck that dash into a GTT, will the RPM work properly?

I mean let's say rev at 3000, will it be actually showing 3000rpm or 4000; where the position or 3000 should be?....

yah confusing...I cannot find any way to explain it better...

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
×
×
  • Create New...