Jump to content
SAU Community

Recommended Posts

Hi,

I'm going to appear for a driving test and can anyone give me tips? I mean what they look for etc. I heard that you're not suppose to look to either side before you come to a complete stop at stop signs.

And that you're suppose to check your rearview mirrors every 10 secs?

Little stuff like that.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/
Share on other sites

Have you had any lessons at all?

If your goin for the one off test, just ask em before you leave..

they will tell you.

As long as you dont ask them how to drive, you should be right

Be very observative. everytime you pull out from somewhere ie. Turn a corner... then check you rear mirror.. just keep looking, and make it obvious your looking.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1609675
Share on other sites

Dont put your car into neutral when coming to a set of traffic lights, use your handbreak even if your on the SLIGHTEST hill and there is any!! chance of rolling back. (even if you think you can handle it... do it anyway just to be safe)

use push pull method of steering (you might already do this?) mirror check... ment to be every 5 seconds rear view? (check in the learning to drive book, they give you this when you get your L's...)

Basically just drive with care, as you would no speeding etc, stop at stop signs.. all the basics, you should be fine.

If you dont have the learn to drive book, i suggest you go get it... this is what they mark you off.. from memory there is 24 compitencies (sp) and the 23rd compitencie is the actual test.... Give this ago? and get one of your mates to mark it off as if he was your instructor... for things like reverse parking you get two attempts etc.

Dayne

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1609744
Share on other sites

don't leave your hand on the gear stick after changing gears...make sure you put it back on the steering wheel asap..

maybe the most important thing is to be confident - but if you've been driving that long i'm sure you'll be ok there.... i just think you have to act like you belong on the road cos if you look petrified and scared of everything you they'll think you're not really ready to be out there on your own :huh:

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1611472
Share on other sites

I once got shot down for merging "too quickly" (If that makes sense)

As in when passing through a 2 lane merge, don't instantly plant yourself in the middle of the newly formed single lane, but instead just continue to hang off to the side of the lane that you're coming from, just in case there's someone in your blind spot that you might end up crunching into if you put yourself in middle of the merge straight away

(I don't think I've made any sense at all)

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1611548
Share on other sites

and with automatic transmission, do you put your gear selector in N if you are at at stop for a long period of time? And what's the point if you are to use your handbrake if you are in D? Do you just keep your foot planted on the brake pedal?

And what's the penalty for driving a manual car with an "automatic" license. My car's an automatic and I"ll have to use it to appear for the test.

Thanks for all the tips. They're helping me alot. I would just drive to the middle when I see the "FORM ONE LANE". So you're suppose to just follow you gutter until the lane becomes narrow enough for one only.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1613349
Share on other sites

And what's the penalty for driving a manual car with an "automatic" license. My car's an automatic and I"ll have to use it to appear for the test.

as far as i know it changes to a manual after a certain period of time (a year?) anyway...I have no idea of the penalty though.
Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1614379
Share on other sites

I got my manual licence first go, and i've only owned a manual car for a year since i got it (5 years ago). first car was auto and current car is auto. i don't think you'll care if you get an auto licence after a year you can drive whatever

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621229
Share on other sites

I dont know what the deal is down here, but the majority of people I know on the Gold Coast just go for their licences in a driving instructor's car.. thus you kill two birds with one stone: You know the car is going to be reliable and fairly nice to use, and it's a manual.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621537
Share on other sites

In NSW I cannot tell you how many people fail because they fail to stop at the STOP sign when they pull out of the RTA drive way. Automatic fail there! Beware.

Also you'd be surprised how many ppl offer bribes just to get their P's! A friends uncle works for the RTA and it ranges from cash sums to ppl (girls AND guys) offering some "back seat action", it's beyond stupid. Learning to drive isn't THAT hard! I'm sure if you can spread your legs (or in the guys case, bend over) then you can work a steering wheel and 2 pedals.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621954
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
×
×
  • Create New...