Jump to content
SAU Community

Recommended Posts

Hi,

I'm going to appear for a driving test and can anyone give me tips? I mean what they look for etc. I heard that you're not suppose to look to either side before you come to a complete stop at stop signs.

And that you're suppose to check your rearview mirrors every 10 secs?

Little stuff like that.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/
Share on other sites

Have you had any lessons at all?

If your goin for the one off test, just ask em before you leave..

they will tell you.

As long as you dont ask them how to drive, you should be right

Be very observative. everytime you pull out from somewhere ie. Turn a corner... then check you rear mirror.. just keep looking, and make it obvious your looking.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1609675
Share on other sites

Dont put your car into neutral when coming to a set of traffic lights, use your handbreak even if your on the SLIGHTEST hill and there is any!! chance of rolling back. (even if you think you can handle it... do it anyway just to be safe)

use push pull method of steering (you might already do this?) mirror check... ment to be every 5 seconds rear view? (check in the learning to drive book, they give you this when you get your L's...)

Basically just drive with care, as you would no speeding etc, stop at stop signs.. all the basics, you should be fine.

If you dont have the learn to drive book, i suggest you go get it... this is what they mark you off.. from memory there is 24 compitencies (sp) and the 23rd compitencie is the actual test.... Give this ago? and get one of your mates to mark it off as if he was your instructor... for things like reverse parking you get two attempts etc.

Dayne

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1609744
Share on other sites

don't leave your hand on the gear stick after changing gears...make sure you put it back on the steering wheel asap..

maybe the most important thing is to be confident - but if you've been driving that long i'm sure you'll be ok there.... i just think you have to act like you belong on the road cos if you look petrified and scared of everything you they'll think you're not really ready to be out there on your own :huh:

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1611472
Share on other sites

I once got shot down for merging "too quickly" (If that makes sense)

As in when passing through a 2 lane merge, don't instantly plant yourself in the middle of the newly formed single lane, but instead just continue to hang off to the side of the lane that you're coming from, just in case there's someone in your blind spot that you might end up crunching into if you put yourself in middle of the merge straight away

(I don't think I've made any sense at all)

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1611548
Share on other sites

and with automatic transmission, do you put your gear selector in N if you are at at stop for a long period of time? And what's the point if you are to use your handbrake if you are in D? Do you just keep your foot planted on the brake pedal?

And what's the penalty for driving a manual car with an "automatic" license. My car's an automatic and I"ll have to use it to appear for the test.

Thanks for all the tips. They're helping me alot. I would just drive to the middle when I see the "FORM ONE LANE". So you're suppose to just follow you gutter until the lane becomes narrow enough for one only.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1613349
Share on other sites

And what's the penalty for driving a manual car with an "automatic" license. My car's an automatic and I"ll have to use it to appear for the test.

as far as i know it changes to a manual after a certain period of time (a year?) anyway...I have no idea of the penalty though.
Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1614379
Share on other sites

I got my manual licence first go, and i've only owned a manual car for a year since i got it (5 years ago). first car was auto and current car is auto. i don't think you'll care if you get an auto licence after a year you can drive whatever

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621229
Share on other sites

I dont know what the deal is down here, but the majority of people I know on the Gold Coast just go for their licences in a driving instructor's car.. thus you kill two birds with one stone: You know the car is going to be reliable and fairly nice to use, and it's a manual.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621537
Share on other sites

In NSW I cannot tell you how many people fail because they fail to stop at the STOP sign when they pull out of the RTA drive way. Automatic fail there! Beware.

Also you'd be surprised how many ppl offer bribes just to get their P's! A friends uncle works for the RTA and it ranges from cash sums to ppl (girls AND guys) offering some "back seat action", it's beyond stupid. Learning to drive isn't THAT hard! I'm sure if you can spread your legs (or in the guys case, bend over) then you can work a steering wheel and 2 pedals.

Link to comment
https://www.sau.com.au/forums/topic/89144-driving-test/#findComment-1621954
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...