Bov

[LouLou]

hey guys

well i wanna take the standard bov on my car and just wanna know how to do it and where can i get plugs from

[Kristov]

Easy there should be 2 bolts holdong it on to the intake pipe a little bit before the throttle body. Undo them and the pipe that leads back into the intake.. Dont know where to get plugs from.

[Mumbo#5]

just use a welsch plug and hose clamp.. does wonders.. why u takin the stocko off out of curiosity?

[lukits01]

Since we're on the subject thought I'd ask

Where off the plenum do people usually plumb the vacume hose from? any pics?

Ive just installed a GFB BOV and Ive been driving lightly with it seems like everytime I take the foot off the throttle I get a surge, unless thats what the BOV is suppose to sound like.

[kimbod]

hey guys

well i wanna take the standard bov on my car and just wanna know how to do it and where can i get plugs from

<{POST_SNAPBACK}>

Why do you want to take the BOV off for? they are put on from the factory for a reason. Turbo cars become real jerky to drive with them removed and you can also damage your turbo. They are there to vent some of the compressed air off

[46n2]

if this turns into *another* BOV vs no BOV thread i think i'm going to kill myself <_<

If you want to take the bov off as mentioned already it'll only be held in by a couple of of bolts. Once it is off, you will need a plate to block off the original outlet, and you'll need to seal up the hose that plubs back into the inlet tract.