Jump to content
SAU Community

Recommended Posts

hey folks,

On a bit of a highway trip a week or two ago, abour 40 minutes into it i realised that i was holding about 30-60 degrees to the right to keep the car straight, sure enough just as i realised the warning light came on. kept goin for another ten or fifteen problems then pulled over. after turning the car off and on it came good. does anyone know wat could have happend?

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/
Share on other sites

Don't take this the wrong way, but:

1. This has nothing to do with forced induction.

2. SEARCH. Yes, it sounds like a cliche but HICAS issues have been covered extensively. For some useful threads: http://www.skylinesaustralia.com/forums/in...icas+%2Bproblem

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1616246
Share on other sites

Now theres a good question.

HICAS is designed to turn the rear wheels slightly when you least expect it, throwing you off the race track.

But maybe a better explaination is that it is the active rear wheel steering on skylines and some other nissans. And over the last 15 years plenty of people have started having trouble with it, most often when they have installed an aftermarket steering wheel

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1618246
Share on other sites

that would be the crooked steering boss problem, the steering wheel sensor is not straight and after 10min or so without turning HICAS gives an error since it figures you can't have been driving in circles for 10min

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1618301
Share on other sites

exactly like that....loosen off the steering wheel, drive in a straight line for say 20m, then put the wheel on as straight as you can. drive another 20m to make sure you got it right then bolt it in place.

Of course if you have the wrong boss kit for your car that wont help :)

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1618322
Share on other sites

since the hubs are designed to turn when HICAS does, if you just remove the rack there is nothing stopping the wheels turning on their own.

So you need a HICAS lock bar, GTRGeoff on these forums sells them cheap :)

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1622544
Share on other sites

that would be the crooked steering boss problem, the steering wheel sensor is not straight and after 10min or so without turning HICAS gives an error since it figures you can't have been driving in circles for 10min

hi all

I have the same problem with my r32 gtr 10minutes driving on the expressway (no sharp turning) and the hicas warning comes on.

I have what appears to be the original wheel with the boss as part of the wheel so it cant be put on wrong position. there is a drive dog that locates the horn ring and steering angle sensor at the bottom and a 3pin socket for the horn wiring that locates at the top of the wheel so both are aligned vertical. there is a factory looking centre punch mark on the end of the steering shaft that lines up with the same mark on the wheel BUT on inspection of the zero degrees slot in the sensor disk it is about 160 deg right of the sensor. it all looks factory but either the wheel or the sensor must be from another model. Any help on how to id the right parts.

the wheel is 3 spoke leather bound with leather gtr horn button about 50mm dia.

Thanx

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1623593
Share on other sites

this might be a dumb question but how do u know if hicas is still working? i dunno if i have the bar, wat do i look for?

Yo Mass .... check this thread ..

http://www.skylinesaustralia.com/forums/in...showtopic=58778

This is from the Tutorail section..

shows the procedure for adding the bar.... so you can see what the hicas and bar look like ..

Cheers

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1623605
Share on other sites

My Hicas light comes on aswell like what Duncan was saying about after a while on the highway..

I have stock steering wheel - but for some reason when you line up the car to go straight the steering wheel is about 5-10 deg off being straight. SHould I take wheel off and rotate?? Is it possible with the stock wheel?

Or should I be getting a wheel alignemnt.

A mechanic thought I needed a new sensor - but the wheel is definately off centre so maybe should fix that first??

Link to comment
https://www.sau.com.au/forums/topic/89591-hicas-gone-mad/#findComment-1639990
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...