Jump to content
SAU Community

Recommended Posts

Hi guys, I'm new to the site.

I currently own a Skyline R32 GTS-T Type M in Calgary, Canada.

I am planning to move to Brisbane within a couple of years and was wondering what shops you guys have that sell aftermarket parts for our Skylines. I am wondering about this since here, we only have one shop that specializes in cars like this since they are very rare.

Also, what kind of restrictions on modifications are there in Australia that do not apply here. I've read a thread on blow off valves and was wondering whats the deal with them. Do police actually pull you over and charge you for having a bov?

If anyone has any information that would be helpful to me, that would be great.

I am also planning to import my S14 there, so I have a question about import laws and insurance on LHD cars.

Thanks in advance, see you guys on the streets sometime.

Anton.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/
Share on other sites

If I were you I'd just sell your cars and buy new ones when you get here. your skyline is probably worth more over in Canada than it's worth here.

and re the BOV, here in QLD at the moment I've never been done for mine. I guess it comes down to whether the cop wants to be an a$$hole and how stupid you were being to attract his attention.

be more specific, what aftermarket parts do you want? How old are you? What do you want your car to do? etc, etc, etc.....

QLD is STILL the best state to live if you're a hoon. No fixed speed cameras, limited police presence on teh roads most of the year, (except for school holidays) the largest margin in terms of how many km over the limit you have to be going before they'll book you...... etc. Not that I'd ever hoon.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1617797
Share on other sites

I am selling my Skyline as we speak. My S14 on the other hand I would prefer not to. It will soon have an RB26 with S15 front end and a whole lot of mods. So umm...not liking the idea of selling too much. But I guess I would have to anyways since I will not be willing to spend that amount of money converting.

BTW, I heard that if you're a citizen in Australia, you can bring your car over. My gf is from Brisbane, which is why I will be moving. So if car is registered on her? Would that make a difference?

But my main concern is the shops and parts availability. So can you tell me if there's a big market of shops dealing with imports?

Thanks for your responds, they are greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1618830
Share on other sites

i think you have to have owned the car for at least 1 year overseas before you bring the car over..

but it still has to meet australian standards with regards to everything in it (engine, brakes, tyres, etc.). i don't like the chances of registering a s14 with an rb26 unless every finicky detail has been covered including a RHD conversion..

good luck!

Warren

PS go canucks!

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1619416
Share on other sites

Hmm... :mellow: I don't want to give up my S14 hah.

Thanks for all the input though guys...but still about shops. I need to know what kinds of things are available but everyone seems to be ignoring this question. I don't want anything specific like adresses and everything just wondering if I can order all my parts locally or have to order online.

i.e. Here we have Autodream, www.autodream.ca, know and buddies with most of the guys there. They know pretty much everything there is to know about Nissans. Not a traditional shop, they only do aftermarket modifications to cars, swaps, and importing engines.

Just want to know if there is anything similar there. I do most of my work myself but it's good to be able to consult with someone and/or ask for help.

Thanks to all of you to take the time to reply to me. I've done some research on all my questions myself but some were not made clear to me and it's best to find out things (like shops) from people that actually live there instead of getting information from the web.

Also, two more questions if you guys don't mind. One being... Here S14 and well all models of Skylines are very rear. What is it like in Brisbane and what price range would I be looking at? I am looking more into S13 or S14 than Skylines.

Also, what other car forums do you guys have that are pretty popular that I can read and find out more info? Thanks.

Thanks, Anton.

P.S. Go Flames.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1619840
Share on other sites

skylines in brisbane... well, i drive 10 kilometers home from work and i saw at least 5 skylines today. and there's at least 6 that park in the street i work in. you could say they are in plague proportions. and i drive past at least a dozen businesses that cater to performance vehciles in some way in that same 10km.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1620322
Share on other sites

Why not ship all the parts over (if you can!) for the engine transplant and buy an S14 over here and do the conversion here.

Or even just wait till you get to Brisbane and play to your hearts content with engine conversions and different front ends without the hassles of bringing the car over with you.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1620532
Share on other sites

Yup, going to Australia cause girlfriend hates the cold and misses home. I get pretty dizzy when its like 25 degrees haha so I don't know how I'll handle the heat.

Well I will be loosing money if I sell it right now, so thats why I want to bring it with me. But I don't think I have a choice now. Guess I'll have to start from scratch.

Thanks for info.

Link to comment
https://www.sau.com.au/forums/topic/89676-questions/#findComment-1621108
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...