Jump to content
SAU Community

6x9's In Parcal Shelf


bilbo117
 Share

Recommended Posts

I was wondering if anyone here has 6x9's in there parcal shelf and what modifications they had to get to fit? im on the border line of deciding wether to make a new parcal shelf which is thicker, and lift the 6x9 higher so it doesnt hit the shelf. please help! if u have 6x9's can u post a photo please?

Link to comment
Share on other sites

I've only seen or heard about two ways to do this..

either just cut out the parcel tray enough to fit in the speakers (then use rubber surrounds or something if you like).. or I've also seen a guy build a kinda box for the shelf - the speakers were on like a 30 degree angle facing the cabin. It was quite interesting, looked pretty sweet, and worked :) (just be sure to cut the centre in order to see through your review mirror.

otherwise just go buy a couple of 6/6.5s :) I prefer them over 6*9s anyway

Link to comment
Share on other sites

  • 2 weeks later...

i think they might sound better in the little boxes?

i have alpine type r 6" round speakers in the factory holes in my R33 and they sound shocking.... no bass at all from them and i think its because there not sorta sealed in a box kinda thing??

Dave

Edited by r33freely
Link to comment
Share on other sites

go for 6 inches if you are gonna have a sub or 2 if not go 6x9's [got to have bass =)]

best thing to do is make a new tray out of the thickest mdf u can fit ...

mount it back in with some bolts and foam tape <-- to stop any vibration ...

the more solid your parcel tray is the better ...

i will be trying to do this on the weekdend aswell as sound deaden the doors a fix the crazy rattles comming from my boot

cause at the moment my car sound like a marca on steroids =(

oh and whatever you do make sure you cater for child restraints its illegal not to have them !!!

just out of curiousity whats the front stage of you system like???

Edited by MsG_ChRiS
Link to comment
Share on other sites

You serious?  That sucks as I can't put them back in :D

I realised that after i put in my speakers too.

I have the same setup as elbee.

I wouldnt recommend hacking into your parcel tray. looks a bit messy and once u do it its doen foreever..

I got a thick bit of mdf, and basically cut it to shape using the existing parcel tray. Has to be slightly smaller coz it sits higher, and the angle of the window comes into it. The wood is about 2 cm thick. sat the 6x 9s into it. There isnt much room to move and play with, and the speakers sit at a 45 degree angle like in elbees pic.

Thick wood and a bit of foam tape around the bottom to stop it vibrating from the bass the sub pumps out and your set.

Sounds really good.

Might be an idea to cut some holes into it and cover it with carpet or vinyl so the boot isnt completely sealed. Want to let some sound waves through!

Link to comment
Share on other sites

Too late now :) I think I'll look into it when I install an amp / sub...

ATM it still looks like I have three harness mounts, I re-used the original grills so I could retain the top half of the harness mounting (held on using double sided velcro). If I get told off for it, I'll replace it then.

Thanks for your help though :)

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

just installed 6 inch cones in my rear parcel shelf with a subbie and my system is rocking. Just remember when you cut into the rear parchel shelf (The metal) your car can be defected for it.

u can also b rejected when u go for your pink slip then u would have 2 weld in a new shelf.....is illegal 2 cut any meyal in your shelf

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great to know! The guys from The Skyline Shed are going to sort it out and send what I ordered anyway. Turns out their supplier sent them the wrong stock.  But it's good to know I "can" put this in if needed
    • You do not need an LSD oil in any stock (non-GTR) diff, even if it is an "LSD". This because none of the (non-GTR) LSDs are clutch/friction type LSDs. Either viscous or helical - neither of which require an LSD oil.
    • Hi everyone, I bought the Redline diff oil and the seller has sent me Redline 75W90NS even though that’s not what’s pictured.  I’ve already booked a hoist to go and change my diff tomorrow but I’m not sure if the NS is ok for the rear diff in a R34 GTT I think the NS does not have any slip modifiers so would that be an issue?    thanks in advance 
    • Not easy to find pics from 15 years ago, but here is a partial one. Keep in mind that it curved immediately from the airbox, then kept a straight line for the MAF to read correctly, followed by a 45 degree bend straight down to the turbo. This connection was the most difficult as it had to twist as well as bend to meet the almost vertical straight section of the intake.
    • Yes, well, wrt a wheel alignment, there are two types. Either: You have very little added adjustables, in which case the alignment can be done by anyone in any tyre shop or equivalent, and will only take 30 minutes, and so there is no reason to even consider leaving the car there. OR: The alignment is a major exercise because you have adjustables everywhere and so you will need to be taking it to a shop that is skilled and experienced at setting up race cars and the like, and you won't need to worry about leaving the car there.
×
×
  • Create New...