Jump to content
SAU Community

Recommended Posts

I was wondering if anyone here has 6x9's in there parcal shelf and what modifications they had to get to fit? im on the border line of deciding wether to make a new parcal shelf which is thicker, and lift the 6x9 higher so it doesnt hit the shelf. please help! if u have 6x9's can u post a photo please?

Link to comment
https://www.sau.com.au/forums/topic/89807-6x9s-in-parcal-shelf/
Share on other sites

I've only seen or heard about two ways to do this..

either just cut out the parcel tray enough to fit in the speakers (then use rubber surrounds or something if you like).. or I've also seen a guy build a kinda box for the shelf - the speakers were on like a 30 degree angle facing the cabin. It was quite interesting, looked pretty sweet, and worked :) (just be sure to cut the centre in order to see through your review mirror.

otherwise just go buy a couple of 6/6.5s :) I prefer them over 6*9s anyway

  • 2 weeks later...

i think they might sound better in the little boxes?

i have alpine type r 6" round speakers in the factory holes in my R33 and they sound shocking.... no bass at all from them and i think its because there not sorta sealed in a box kinda thing??

Dave

Edited by r33freely

go for 6 inches if you are gonna have a sub or 2 if not go 6x9's [got to have bass =)]

best thing to do is make a new tray out of the thickest mdf u can fit ...

mount it back in with some bolts and foam tape <-- to stop any vibration ...

the more solid your parcel tray is the better ...

i will be trying to do this on the weekdend aswell as sound deaden the doors a fix the crazy rattles comming from my boot

cause at the moment my car sound like a marca on steroids =(

oh and whatever you do make sure you cater for child restraints its illegal not to have them !!!

just out of curiousity whats the front stage of you system like???

Edited by MsG_ChRiS
You serious?  That sucks as I can't put them back in :D

I realised that after i put in my speakers too.

I have the same setup as elbee.

I wouldnt recommend hacking into your parcel tray. looks a bit messy and once u do it its doen foreever..

I got a thick bit of mdf, and basically cut it to shape using the existing parcel tray. Has to be slightly smaller coz it sits higher, and the angle of the window comes into it. The wood is about 2 cm thick. sat the 6x 9s into it. There isnt much room to move and play with, and the speakers sit at a 45 degree angle like in elbees pic.

Thick wood and a bit of foam tape around the bottom to stop it vibrating from the bass the sub pumps out and your set.

Sounds really good.

Might be an idea to cut some holes into it and cover it with carpet or vinyl so the boot isnt completely sealed. Want to let some sound waves through!

Too late now :) I think I'll look into it when I install an amp / sub...

ATM it still looks like I have three harness mounts, I re-used the original grills so I could retain the top half of the harness mounting (held on using double sided velcro). If I get told off for it, I'll replace it then.

Thanks for your help though :)

  • 2 weeks later...
no its not you need one for each seatbelt so three in total

Hmm, I just finished installing some JBL 3 way 6's in the back and now the metal brackets for the child restraints don't fit as the tweeters get in the way :cheers: any ideas?

  • 2 weeks later...

just installed 6 inch cones in my rear parcel shelf with a subbie and my system is rocking. Just remember when you cut into the rear parchel shelf (The metal) your car can be defected for it.

u can also b rejected when u go for your pink slip then u would have 2 weld in a new shelf.....is illegal 2 cut any meyal in your shelf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are fine with China turbos, Maxpeedingrods makes a bolt on turbo. Ive had mine for two summers now and it seems to be holding up ok. 
    • Howdy all Im in a little predicament and wondering what everyone’s thoughts are? I’ve had my long block rebuilt and am in the market for a turbo due to my old one having metal shavings from crank bearings (cause of rebuild) go throughout the turbos oil lines and there wheel has a little play. I’m not really aiming for any power, just trying to keep it as oem as possible, but I can’t find a turbo that’s built for the stock ecu or find something that would be a standard replacement. Anyone have any ideas or suggestions 
    • How's everyone going? Just a shout-out introducing myself. I'm James, I live on the north side of Brisbane. I bought an R33 that had been left to rot in someone's front yard for 14 years. Apparently, it has immobiliser/fuel issues. Long story short, it's suffering from a seized engine, plus whatever else turns up once it runs. The car is pretty good considering it sat for so long. It pretty much died after being imported. It has a bunch of Jap parts and a full Top Secret body kit. It's painted Fiat Turchese Festival, or aqua blue if you're not French. Another project to throw money at!
    • So the clockspring is responsible for the indicators cancelling on their own? I thought that was the function of that white thing in the center (any idea what it's called?)
    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
×
×
  • Create New...