Jump to content
SAU Community

Coil Pack Option For Series 1 Rb25

spx25t

By spx25t,
in General Maintenance

 Share

Recommended Posts

spx25t Community Regular

spx25t

Posted
Posted (edited)

I was having problems with my coils in that they were breaking down under load whether from cracks in the casing of the coils or just coils on the way out so I called around to get pricing for new coils

Nissan New standard coils $1200.00 a set

Splitfires $600.00 a set

or the option I chose 6 X MEC717 Bosch coils $250.00 and Leads $50.00

here are some pictures it still utilises the standard ignitor.

My friend is responsible for the wiring up of them (Auto Electrician)

this was very easy to do and fit.

and it has performed faultlessly since fitting

S4010001.JPG

S4010002.JPG

S4010003.JPG

DSCF2867.JPG.

Edited by spx25t
Link to comment
https://www.sau.com.au/forums/topic/89824-coil-pack-option-for-series-1-rb25/
Share on other sites
  • 2 weeks later...
Let Me Drive Mentor

Let Me Drive

Posted
Posted

i have seen this set up on one of the skylines in the HPR mags and they said it worked good but only if you change the leads very often

but i cant see why that is?

and yes please give detaila on the wireing set up would love to see how he set it up!

spx25t Community Regular

spx25t

Posted
  • Author
Posted

Sorry peoples I cannot be any help with a wiring diagram but as you can see from the photos we used the standard ignitor and just had to find the negative and positive from the orginal plugs for the coil packs and then connect them to the Bosch Coils.

Since fitting the coils I have had no problems with Leads they have been fine.

I have also Dyno tested the car since fitting the coils and there has been no loss of power at all so I have yet to find a negative side to the fitment of the coils.

also a added bonus is that if at a later date a MSD is required for additional spark it can be wired in with these coils for BIG boost.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Some of the guys in Qld have been playing with a similar concept but using the redundant spark twin outlet setup as on V6 commo's.

Still looks good and damn good price. A set of quality Eagle leads shouls last a long time at around $80 for the set if the current ones start to have issues.

Wiring this should be fairly easy if you think about it.

  • Like 1
spx25t Community Regular

spx25t

Posted
  • Author
Posted

the motor is a series 1 RB25

coils from Conventry Auto's Smithfield (SYD)

but you can source them from any auto1, Autobarn etc

Bosch MEC717 coils

Leads cost $50.00 for the set from Auto1

Satanic, my mate and I put everything together so no website or number

Let Me Drive Mentor

Let Me Drive

Posted
Posted

yeah man we love the stuff but we just dont know how to wire it all up

what im saying is that if your mate can draw something i would be happy to pay for him to do it so many people can do the same as you and get the good result!

Skas33 Apprentice

Skas33

Posted
Posted

I agree with let me drive, i would love this set up.

Can satanic draw something up.

I have looked at other coil packs ie.GDZ1LA coil packs.

But there is a bit of messing about to get one of these to go on a seris 1(re-wiring of ignitor to an r32 ignitor).

Where as this set up looks reasonably straight forward.

If you guys worked it out you should be able to draw it?

Let Me Drive Mentor

Let Me Drive

Posted
Posted

the wire diagram for the whole set up

even a rough drawing of what you did which wire to where or even get a lot more photos and then we might be able to work out whats going on in the wireing. thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Christof
      HK Premier with plans for slight mods, but keeping clean and simple

      By Christof · Posted

      First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • Butters
      Intercooler Choice

      By Butters · Posted

      I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
    • Toilet Goblin
      Intercooler Choice

      By Toilet Goblin · Posted

      Wanted to follow up on this. Did you end up getting the M073? Still deciding on what to get between nismo m073-79 and plazaman.  
    • funkymonkey
      Crank Motorsports Front Axles

      By funkymonkey · Posted

      I was just watching these boys up in QLD AWD'ing their S13 too.  
    • funkymonkey
      Returning after a long time!

      By funkymonkey · Posted

      Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
×
×
  • Create New...