Jump to content
SAU Community

Recommended Posts

Guys,

I am changing the diff and gearbox oil shortly.

Is there a sort of oil that i should use for the diff and gearbox?

Gearbox: oil?

Diff: oil?

Engine: oil?

What my previous car (VL with SubZero build RB25DET), I used Mobil 1 for the engine. What oil do people recommend to use with a standard engine, not using any oil at all...

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/89831-enginegearboxdiff-oils/
Share on other sites

redline mt-90 for gearbox

then maybe motul or mobil1 for engine

(actually i use pennzoil 10w40 for engine oil. works fine for me... make sure your engine oil is quality and correct weight, but i wouldn't go spending $100 for an oil change with redline stuff. just make sure you change every 4000-5000kms)

probably redline for the diff aswell. though i wouldn't be too worried about diff oil with stock viscous lsd (just make sure the diff oil is for LSD, as the non-lsd diff oils are different)

i use motul 8100 in my engine (i'd use chrono if it was in any higher state of tune) but i change it so regularly, i dont think its too much of an issue. i pay $50odd for a sump full of 8100. chrono is more like $120ish from memory.

i used redline oils in my diffs and gearbox and i will NEVER use anything else. that stuff is liquid gold.

d

redline lightweight shockproof in my box. can't remember specifically which fluids went into the diffs.

d

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

I use

Engine: Motul 4100 Turbolight 10w40

Diff: Redline Lightweight Shockproof

Gearbox: Redline Lightweight Shockproof

yeah lightweight shockproof in the box but use MT90 in the diff. I was having a chat with the guy at rare spares and i asked him why this would be and he was going on about the mt90 has an oil treatment additive in it so the diff doesnt clunk and make alot of noise, you can user lightweght shockpoof and you can by the redline oil conditioner to add in so it works better. so i just went the mt90 thats what redline recommend anyway.

yea thats what i was told too and decided to go with the lightweight i havent had any clunking though.

ps the diff and gearbox are bitches to do if you are just using the bottles they come in :(

Gearbox redline light weight shock proof

diff redline mt90

gtr tranfers DONT USE REDLINE you most use the matic d nissan oil if you want it to last (this came from a head more knowledgable than myself who had rebuilt a shit load of transfers)

engine mobile 1 is good so is the redline products

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (Rb25det intake manifold) I’m having a hell of a time trying to find the full part or part number of this coolant hardline so far I was given these (Below) but they aren’t what I’m looking for and was told it’s the IAR or aac valve but that doesn’t seem to be it either. If someone could point me in the right direction it’d be greatly appreciated. Or if anyone has it for sale that’d be great too. I have recently purchased a greddy manifold and I can’t seem to find my old one to pull it off.  (Front Heater Return / Water Pipe (under intake): Primary part: 14053‑21U10 (front return pipe assembly for R33/R34 RB25DET) Alternative listing: 14053‑21U00 (same pipe, sometimes interchangeably referenced)   Heater Feed Pipe: Listed as 14075‑04U00 or feed-related variant 14053‑AG500)    
    • This sounds cool. But, as per usual, anything really complicated like that, that I take on, constitutes a steep learning curve that I never actually "learn". I just get it working, install it and start using it. Then, when it breaks a few months later, I've got no memory of what I did, how I did it, or even the bloody IP address I gave it. I'm having more or less exactly that problem right now. My Proxmox machine was discovered to be non-responsive, and the VMs on it were ditto. Power cycle it to a stream of loud Dell beep codes - which was unpopular at midnight, I can tell you. Move it to the lounge room so I can HDMI it to the TV for a screen, see the boot messages complaining about the /PVE/data having all sorts of LVM problems, saying it needs to be fixed manually. And I'm like....great. How am I going to work out what I need to do? At least it wasn't the stupid Silicon Power SSD shat itself. Mental note for all readers - DO NOT BUY SP SSDS! They are shit. I have had one take out an entire VM setup already, and this one could have done the same. Maybe it actually has. Cheap Chinesium shitbaskets. I won't cheap out again, even on play projects with no budget. Because my time budget having to fix shit is worth far more than the cost of proper parts.
    • I do typically agree. These days even the screens most people use have more of a boot time than the main device. However, I've seen an interesting use of the RPi in vehicle, however it involves effectively building your own OS and MBR, as then it boots up exceptionally quickly, as you don't have everything needing to start up, and you can then also run it up as an RTOS, while still having more compute than an Android can give for things like display, and processing. A very huge task that would be though for Duncan, I'm not sure that's his skill set (or Arduino programming and wiring) ha ha. If end goal is definitely just water cooling, Arduino would be the simpler setup especially for a rookie. If he wants extra display stuff though, bashing some code in Python on an RPi may be the better result for both systems.   Unfortunately the new device I'm building at work which runs a display, is too slow of a display for dashboard style purposes. More extreme low power, update only a couple of times a day type system
    • I don't like "actual computers" for in car use. They take time to boot up, have OS annoyances, and so on. Arduinos etc are ready to go a few seconds after power on, don't mind being agressively powere cycled, because everything is non-volatile, don't mind being shaken and stirred.
    • As Fred would tell us, it's all about interpreting the rules. It's not a water sprayer, it's a water mister... But everything else you've said, 100%! Even a raspberry Pi would be great, use HDMI out for a display, and add a raspberry Pi CANBus hat to read values out from the ECU.
×
×
  • Create New...