Jump to content
SAU Community

Recommended Posts

We have been doing heaps of tests on oils recently, as we have set up a test using a head in a jig tied into a lathe. The head is then spun at 6000rpm with a syrenge set up on a timer to periodically drop 20ml of oil on the the cam lobes with the test performed for 20mins on each oil. The cam and all related valvetrain is then swapped for another set of new gear so we can gauge exactly what each oil is doing. The tests we are doing are a little crude as compared to full laboritory testing but funnily enough castrol has been sending us samples of new oils they are releasing, initially i think to see if we knew what we were doing but now as a secondary source of info.

The problem is each year oil companys are under stricter and stricter regualations on emissions which means they are removing good minerals and chemicals that prelong engine life and stop engine wear.

It has been very interesting to see what some of the oils have done under the testing. Synthetics are generally half as good as even the cheapest mineral oil, but alot of cars must run synthetic for the weight properties. I dont want to bad mouth any oils and I wont but from our tests, if you want a good synthetic oil for your car run a motor bike oil like motul or repsoil. The oil for motorbikes doesnt need to meet emissions testing and it it designed better as in a bike it has to be under more loads as the gearbox uses the same oil. About the closest to these in terms of performance in our testing would be redline synthetic, and motul 300. There are few good other ones but these few I have mentioned are easily available to most of you guys.

Hope this helps

Castrol was quite good with there mineral 20-50w oil being one of the very best commercial oils and its a good price. There synthetics were better than alot of the others but still not what you would want for the price you pay, alot better than the other major three if you can read between the lines.

For a more standard engine ie, standard lift, duration, valve spring rates its is sufficient!! PM If you want some direct comparisons!!

Cheers.

Gearbox redline light weight shock proof

diff redline mt90

gtr tranfers DONT USE REDLINE you most use the matic d nissan oil if you want it to last (this came from a head more knowledgable than myself who had rebuilt a shit load of transfers)

engine mobile 1 is good so is the redline products

I use redline light wieght shock proof in the transfer too... its great no complaints so far :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • Not ready yet, but maybe later in the year?
×
×
  • Create New...