Jump to content
SAU Community

Recommended Posts

Absolutely,

Due to shift work, I have tons of time off at weird hours... so I reguarly go for drives, if i'm by myself I always hit up the twisties! Putty road, bells line, old pac, wisemans etc etc :D Get some coke, a great CD, and it's the best fun! :P

Link to comment
https://www.sau.com.au/forums/topic/90149-cruising/#findComment-1625894
Share on other sites

I always get the urge to go for a drive. Most of the time I'll not bother (since I can't be arsed getting dressed) but, I used to just drive for the hell of it.

I'm on shift work now too, so sometimes I'll go cruising during the day since all the good roads are deserted. Sometimes I'll go eat Red Rooster in Gosford just because I can.

I used to use driving to calm me down. When I was really aggro (usually late at night) I'd just go for a drive. Not to thrash the car, but just driving at the speed limit and loop from my place to half way across Sydney, buy a coke from a servo, and head back.

Link to comment
https://www.sau.com.au/forums/topic/90149-cruising/#findComment-1626225
Share on other sites

yeah. crusing is mad.

i usally go for a lap before bed. most of the time its to get out of the house to have a ciggy. then turns into a 2hr old pac thrash and 3/4 of a tank :P

most of the time its a drive to maccas for a small coke and the mega long way home. i never gety sick of it

Link to comment
https://www.sau.com.au/forums/topic/90149-cruising/#findComment-1628886
Share on other sites

I go for a drive when i've had a hard day, when i'm stressed out or just scratching that itch. Eating through a $70 tank of petrol or paying $400 an hr for a shrink? hmmm.. Bring on the windy stuff!

i like your reasoning.

Link to comment
https://www.sau.com.au/forums/topic/90149-cruising/#findComment-1629933
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...