Fitting My Pineapples

[KRiMiNaL]

Anybody know how to install them and can do mine for me? Ill pay of course

[GTRsean]

Takes about an hour. Fitted mine myself.

breaker bar, sockets and some muscle depending on how long the nuts have been on the cradle!

Just did one at a time.

[Sydneykid]

Anybody know how to install them and can do mine for me? Ill pay of course

<{POST_SNAPBACK}>

Piece of cake, from a post I made in the Stagea Suspension thread;

Some people have had problems reading/understanding the Whiteline instructions for the rear subframe bushes. Courtesy of Emanuel, I have numbered the bushes in the pictures and numbered the corresponding bushes in the Whiteline instructions. If you are lucky I have got them right, it is so much easier when I am actually doing it. Please do a quick check just to be sure.

It's a bit hard to draw #3 as it goes above the sub frame, which you can't see in the picture. The bushes that go above the subframe have cuts in them. This is so you can slip them over the bolts/studs and don't have to remove the whole subframe to do it.

Cheers

[KRiMiNaL]

thanks mate

[lukits01]

What car? there's a guide in the DIY section for R32/R33

I followed that and took me a hour.

14 and 17mm socket and a breaker bar is all thats needed

[Adrian Knack]

Should you use a torque wrench to tighten the bolts again so as not to over tighten? Or do you just go as strong as possible?