Jump to content
SAU Community

R30 Rb30det

EVLR30

By EVLR30,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

EVLR30 Apprentice

EVLR30

Posted
Posted

hi ive got an 85 r30 four door,im currently in the process of building an rb30det for it , what i want to know is the rb gearbox easy to fit.

Like does the gear lever line up with the whole in the floor pan and do i have to change gearbox mounts ...

if anyone could shed sum light i would be most of appreciative...

Thanks

Sam

Link to comment
https://www.sau.com.au/forums/topic/90356-r30-rb30det/
Share on other sites
EVLR30 Apprentice

EVLR30

Posted
  • Author
Posted (edited)
the rb20 box shifter sits back about 1/2 an inch past the end of the existing hole

i dont mean to be a cheeky bastard but what did you do when you fitted youre RB25DET did u move the engine forward or cut out the floor pan ... please enlighten me

Thanks.

Edited by EVLR30
Link to comment
https://www.sau.com.au/forums/topic/90356-r30-rb30det/#findComment-1635358
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r34killa
      General interior R34 questions

      By r34killa · Posted

      Hi everyone, I'm generally new to DIY projects, and I've browsed this forum and watched a lot of youtube videos but still have a few questions   Firstly, how does spray painting interior hold up? in particular like vinyl parts, my current mode of thinking is to use methyl spirits to take off original paint, clean/prep well, light coats, no primer or clear coat    Secondly, what is recommended for the headliner and, for example (my car is a r34), the A-pillars which are some kind of other fabric material, do you think I would be successful at retrimming these? or would it be better to go down the blacking out via Dupli-Color Vinyl & Fabric Paint    Any other advice / tips / tricks for refreshing/modernising these interiors?    Thanks
    • D.s
      WTB-R32 gtst front bar-sydney

      By D.s · Posted

      As title says  Pm a photo with what u have  Type m style would be good As Hidding a thick front mount
    • Duncan
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By Duncan · Posted

      Just note that when trying to find a short in a globe power supply, it is best to disconnect the globe as it will allow current through to earth. With it unplugged it is easier not to get confused. Also with the r32 wiring, the high beam has 2 power supplies (one when you push the switch forward and the other when you temporarily pull it back; so if it is the high beam blowing you will need to trace both circuits
    • dyl33
      R32 gtst Center bearing (brand new)

      By dyl33 · Posted

      $75 Location: Gold Coast  Can post via Australia post
    • GTSBoy
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By GTSBoy · Posted

      That's a short. Find the short. It will be somewhere between that fuse and the headlight. Start by removing the plugs from the back of the headlight and dimmer switches, and measure resistance to earth. Supply side (power from the fuse) should have none. The other side should have resistance compatible with whatever globe(s) is there (which is relatively easy to say for a normal globe, perhaps not as easy to say for LEDs). Anyway, if you have very low resistance, you defo have a short. Then you just have to run the wiring like you're running the bowel of a dog (on the operating table) that has swallowed something it wasn't supposed to.
×
×
  • Create New...