Standard Gtr Rotors

[gun_200]

Hi All,

I have a set of R33 GTR rotors waiting to go into my S15 with callipers to match but im a little hesitant as im not sure if there is a difference in Left and Right rotors.

I cant seem to find a visible difference, i.e the casting looks identical, it doesn’t seem to show a directional bias in the cooling veins, from this I have assumed that there is no difference between L & R.

Could someone confirm if this is the case???

Cheers

Marco

[gun_200]

Sorry to be impatient guys, can anyone confirm?

[Ronin 09]

Std GTR32 rotors are curved vane, so are left and right.

I can only then assume that std GTR33 rotors would also be curved vane, and should be mounted left and right specific.

I'm only guessing, so I would check with someone who knows for sure...

I'm sure someone on here will know

don't know if that helps you at all.

[gun_200]

hmmm. I’ll get a photo and post it. I might have 2 of the same side haha, though there is no curvature in the veins on mine...

[Beer Baron]

if they are not curved vane then don't worry about it. It will be obvious by looking at them if they are staight vane, or curved vane.

[maccattack]

If they are stock rotors there is no difference between left and right.

[gun_200]

Sweet..Thanks guys now i can go and get them slotted

I've attached the pic anyhow, thanks again

Edited October 12, 2005 by gun_200

[Beer Baron]

they actually look like DBA kangaroo paw rotors to me. in which case they usually have an L or R sticker and part number suffix.

[gun_200]

DAM... i thought i had it sorted.. the part numbers are the same though might not be DBA's as on the internal they don’t have varied casting like the PAW ones.. hmmm..

I take the general consensus to be if the rotor is non-bias and symmetrical it will not effect one side or the other....

they actually look like DBA kangaroo paw rotors to me. in which case they usually have an L or R sticker and part number suffix.

<{POST_SNAPBACK}>