Jump to content
SAU Community

Group Buy - Dba Slotted Rotors - From $195 Each.


Recommended Posts

Heres a group buy for DBA 4000 series slotted rotors.

If I can move 10 sets (40 rotors) then we get the good price ;)

(Note - pairs can be purchased instead of a full set.)

dba4000.jpg

INFO:

All are the 4000 series slotted only.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each

Rear (297mmx18mm) - $195.00each

R33 GTST (RB25DET)

Front (296mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DET) non v-spec brembo

Front (296mmx32mm) - $200.00 each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DETT) V-spec brembo

Front (324mmx30mm) - $220.00each

Rear (300mmx22mm) - $195.00each

R33 & R34 GTR run the same brakes as the R32 GTR v-spec brembo.

Also Available :

R31 Skyline

Front slotted (non 4000 series) $150.00each

Rear slotted (non 4000 series) $150.00each

350Z (normal brakes)

Front (296mm x 24mm) - $195.00each

Rear (292mm x 16mm) - $205.00each

350Z (brembo brakes)

Front (4 piston 324mm x 30mm) - $220.00each

Rear (2 piston 322mm x 22mm) - $220.00each

More info at the DBA website

SHIPPING:

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Postage to Perth - Darwin - ACT - Alice, is a flate rate $44

The rotors are fairly heavy so all will be sent via courier.

FINISH DATE :

Ends - 25th Oct 05.

Payments due - 30th Oct 05.

Im getting 2 full sets (for me and a mate) so we only need to move 8 sets (16 pairs).

1/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

2/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

3/ mass_iv - R33 GTST (2xF) - PAID - PAID - sent.

4/ YLD-CHLD - R32 GTR (2xF & 2xR) - PAID - sent.

5/ SirSkyline - R33 GTST (2xF) - PAID - sent.

6/ Pretender - R33 GTST (2xF & 2xR) - PAID - sent.

7/ nisr32 - R32 GTST (2xF & 2xR) - ??????????????

8/ gR33ddy - R32 GTST (2xF) - PAID - sent

9/ private buyer - R33 GTST (2xF) - PAID - sent.

10/ Chicko's GTR32 - R32 GTR (2xF) - PAID - sent.

11/ shif_tea - R33 GTST (2xF) - PAID - sent.

12/ gtrGhosTDoGG11 - R33 GTST (2xF) - ??????????

:)

Link to comment
Share on other sites

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are these the kangaroo paw ones????

if so and for $200 each ill take a set of front discs, not sure if its r32GTR or r33GTST yet....

Yep, they are the kangaroo paw ones.

Link - 4000 series spec sheet

I'll include you in the list of buyers - you can confirm which type you require at any time.

:)

Link to comment
Share on other sites

oh and Paul when do you think the due date for payment will be?

Payment can be made at anytime.

A couple of guys will be paying in about a week which is ok.

PM me when you are ready and I'll forward payment details.

Once your payment has been received your rotors will be sent.

Cheers :(

Link to comment
Share on other sites

hey i would also like to know the price without group buy on r34 gtt front set

cheers,

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • That's the most absurd thing I've ever heard. I would go cut bellhousing over that monstrosity of a flywheel all day, every day. It puts a lot more mass further from the last main bearing. I've had nothing but problems with Collins in the past and refuse to ever buy their products again. I would not trust anything they tell you. He's playing his salesman card.  I'm currently at 640whp on a mustang dyno (~770bhp) with the intentions of running E85 and a lot more power this upcoming spring. Cheers, 
    • Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
×
×
  • Create New...