Jump to content
SAU Community

Recommended Posts

Im putting a computer into the boot of my r33 in the next couple of months and want to know where would be the best place to run a VGA, USB, and audio cables with the least amount of interference. The wires will run from the boot to the head deck.

The stereo system is standard but the speakers will be upgraded after the install comences.

Ill post pics if people are interested

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/90877-audiovideo-wiring-and-interference/
Share on other sites

Im starting with a basic P4 2Ghz pc with onboard everything (Video, sound) this is going to be powered by a standard Power supply from a 12V to 240V inverter. Have purchased a remote control on/off switch, that i will have hanging from my keys. :)

The head deck i will be receiving soon will have audio and video inputs and usb to control a 7" touch screen, it has a built in amplifier which i was going to run the speakers with (for now).

At the moment im just organising the placement of it in the boot where it will keep coolish and not visible, might have to underclock it for heat reasons.

If you have any more questions, ask away :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If the tyres were fitted when new, I wouldn't expect much over 5 years of use. Especially if the car lives outside full time.  If the tyres had been stored under ideal conditions and are being purchased new, I'd fit a set of already 5 year old tyres if I only expected to get 1 to 2 years of use out of them.  I've purchased many a set of new (but quite old) tyres from St George Tyres when I just needed some decent rear tyres to drift on.  Here is a pretty crazy example, can't say I've ever bought 11 year old tyres from them before though lol.  https://www.stgeorgetyres.com.au/momo-tyres-245-45-17-outrun-m3-official-product-by-momo-italy.html
    • Also, a tip for young players  Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old
    • Yeah - 4 or 5 years is the limit for decent tyres. Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause. I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.
    • Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!
    • I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard.  This falls within the guidelines of 10 years old that I've read which surprises me given their condition.  I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?
×
×
  • Create New...