Jump to content
SAU Community

Recommended Posts

Just had a ride in my friend's new MX5..........damn the car feels powerful with good power to weight ratio........

Now I feel my skyline doesn't have enuf power (which it doesn't)........so unsatified with my current power............im gonna be in a slump for a while

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/
Share on other sites

Engine type 2.0 litre in-line 4 cylinder 16 valve DOHC S-VT

Engine capacity cc 1,998

Bore and stroke mm 87.5 x 83.1

Compression ratio 10.8 : 1

Maximum power kW 118 @ 6,700rpm

Maximum torque Nm 188 @ 5,000rpm

Throttle control Electronic (drive-by-wire)

Fuel system Electronic fuel injection

Fuel tank capacity litres 50

Fuel consumption man (combined) 1 l/100km 8.5

auto (combined) 2 l/100km 8.8

Recommended fuel Premium unleaded (min. 95 RON )

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1638076
Share on other sites

Yeah the MX-5's are a great drivers car. Its a shame they can be underrated as a performance car as you'd only rarely see a nicely modded up one as you would pretty much see them in the hands of some toorak or south yarra dude who only bought it because it was a convertible and has kept it stock standard for the past 10 years being blind to further modding.

Comparing it to my R32 GTSt I've driven both the NA and NB series MX-5's they are piss weak but they feel alot more chuckable around corners even though they are relatively underpowered. they'd be a really good slightly most costly alternative to an AE86 if you looking for a light NA rear-wheel drive car.

they aren't as fast in a straight line (but then again I'm not into drags at the traffic lights, no skill in that.) but they are awesome on the twistys. :)

they'd be a good drift weapon if given a good balanced setup.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1638216
Share on other sites

not sure about the specs, but apparents she had the limited edition of the MX5, bilstein suspension...... I think its about 160 hp and 1100kg......AND

7 thats right 7 CUP HOLDERS!!!!!!!!!!!!!!!!! and I could seriously use one in my car.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1639600
Share on other sites

Anyone see the ad in drive for the new mazda 6?? 190kw and 380nm torque at 3000rpm wwttff thats nuts how can they get that amount of torque at such low revs?

Modern turbo cars are getting better and better at producing massive torque at low RPM. The old school of turbos were laggy and needed revs revs revs to make power, while the NAs made the low RPM torque. Now the opposite is true, with high powered NAs needing RPM to make big numbers, and turbo cars making huge torque at very low RPM.

Some of the more rediculous torque figures are from small modern turbo engines:

Holden Astra Turbo: 250Nm @ 1950RPM from 2.0 litre 4 cyl

Volkswagen Golf GTi: 280Nm @ 1800RPM from 2.0 litre 4 cyl

Saab 9-5 Aero: 350Nm @ 1900RPM from 2.3 litre 4cyl

And just to make them all feel weak:

Bentley Continental GT: 650Nm at 1600rpm

Mercedes SL65 AMG: 1000Nm at 2000-4000rpm from 6 litre V12

Bugatti Veyron: 1250Nm at 2200-5500rpm from 8 litre W16

The 4 banger creates max power at 5500 so it probably redlines about 6, so max torque would be around that area.

Power is dependent on both revs AND torque, so peak power does not necessarily appear near peak torque.

why oh why doesn't Mazda put a rotary in one damnit!

This was for sale a few months back:

13B Rotary MX-5

Alternatively check out the Bullet Roadster. Basically an MX-5 with a 13B, 20B,Lexus V8 or supercharged V8. Bit more expensive than the standard MX-5 though! Mazda will never make a rotary MX-5 because it will eat into RX-8 sales, and perhaps the rumoured upcoming RX-7.

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1639958
Share on other sites

I have a reasonably modified 1989 NA6CE MX-5 (imported Eunos Roadster actually), as well as a newly complied and registered R32 GTR with HKS GT2530's and supporting mods.

The MX-5 is much fun it's criminal. Different sort of fun tho - and I'd actually take the MX-5 for hills driving.

The GTR is just insanely powerful and efficient, but the MX-5 is supremely fun to drive. I think my next car will be the new MX-5, modified of course :O

Link to comment
https://www.sau.com.au/forums/topic/90923-the-new-mx5/#findComment-1641115
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
×
×
  • Create New...