Jump to content
SAU Community

Recommended Posts

As my 33 is getting its cage soon some stuff won't be going back in so Im having a little clearing sale.

1st the interior, basicly all of the trims need to go for the cage to fit. The door and rear trims have a custom cobalt lether, garantee you will not find it in any other car, It was custon dyed for me. (Im a trimmer by trade)

post-15176-1129152169.jpg

The Aircon unit and heater box etc will not be returning, more roll cage stuff.

There is also the aircon compressor and bracket.

post-15176-1129152360.jpg

post-15176-1129152452.jpg

The rear seat is going too, featuring the same custom cobalt leather piping and black leather sides in the deck of the seats.

post-15176-1129152544.jpg

The front seats are still needed at the moment however, the centre console and gear boot panell, which also feature the custom cobalt leather, are up for grabs.

No fixed prices as yet, and will sell it all individually (prefer not to see it seperated though, looks good all together)

Im west of brisbane and will post/courier stuff so if interested make an offer.

Link to comment
https://www.sau.com.au/forums/topic/90932-r33-interior/
Share on other sites

As my 33 is getting its cage soon some stuff won't be going back in so Im having a little clearing sale.

1st the interior, basicly all of the trims need to go for the cage to fit. The door and rear trims have a custom cobalt lether, garantee you will not find it in any other car, It was custon dyed for me. (Im a trimmer by trade)

post-15176-1129152169.jpg

The Aircon unit and heater box etc will not be returning, more roll cage stuff.

There is also the aircon compressor and bracket.

post-15176-1129152360.jpg

post-15176-1129152452.jpg

The rear seat is going too, featuring the same custom cobalt leather piping and black leather sides in the deck of the seats.

post-15176-1129152544.jpg

The front seats are still needed at the moment however, the centre console and gear boot panell, which also feature the custom cobalt leather, are up for grabs.

No fixed prices as yet, and will sell it all individually (prefer not to see it seperated though, looks good all together)

Im west of brisbane and will post/courier stuff so if interested make an offer.

Hi there.

Don't suppose you have the rectanguler cup thing which sits in and holds the driver side window controller down?

cheers

Link to comment
https://www.sau.com.au/forums/topic/90932-r33-interior/#findComment-1637657
Share on other sites

Clicking? My aircon clicks for 20 seconds and then stops, but it will click again as it changes vents or temperature. Is that normal? (sorry to go OT on the thread)

Link to comment
https://www.sau.com.au/forums/topic/90932-r33-interior/#findComment-1638464
Share on other sites

  • 2 weeks later...

I am after the 2 control actuaters that go on the side of the heater unit if you can give me your details i will call and arange something to get them of your hands, cheers .Andrew

Link to comment
https://www.sau.com.au/forums/topic/90932-r33-interior/#findComment-1680572
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...