Jump to content
SAU Community

Sau Vic General Meeting - Tuesday 18 October

Bec

By Bec,
in Victoria

 Share

Recommended Posts

Bec Grand Master

Bec

Posted
Posted

It's SAU Vic Social Meeting time. That's right, Beer, Food, Beer, Cars, Beer and laughs!

These social meetings are divided into two parts, the first if your hungry is a meal from the bistro (GO CHICKEN KEIV!!) and a chance to have a chat with other members then the second is a short informal meeting.

We use these meetings to give quick rundowns on past events with video's, pictures and stories etc, to address pressing matters, tell members what's happening behind the scenes and for discussion on upcoming events. It's all pretty relaxed and fun. This is a great opportunity for those of you who don't know too many members to come down and mix as new faces are always welcomed.

Time - 8:00pm (Dinner from 7:00ish)

Date - Tuesday 18th October 2005

Location - Bell's Hotel, 157 Moray St, South Melbourne (Cnr Moray St & Coventry

St Melways Ref - 57, G1)

Note - This Pub is family friendly with an area set aside for us. There is plenty of seating (tables and chairs) and meals for all.

Who is welcome - Everyone!

ALL Merchandise will be avaialble for sale at this meeting.

2471Bell_s_Hotel.jpg

Mr. Oizo Grand Master

Mr. Oizo

Posted
Posted (edited)
isnt it KIEV?

"I before e, except after c"

:angry:

I should be able to make it to this, have to burn a few copies of the show and shine photos and hand them out.

Edited by darK
Jamezilla Grand Master

Jamezilla

Posted
Posted

Also - there will be a run down on the Sydney Motor Show, with a look at what's new and hot in the motoring world, a review of the Show 'n Shine, a few photos from the Team Wang Round the Bay Cycle Squad, a look at our coming events - including DECA... and the usual Gold Logie winning shenanagins that you all know and love.

CNR33 Community Regular

CNR33

Posted
Posted
I forgot to mention - I will be at the Casino from about 4.30pmish until the meeting - if anyone wants to come hang out.

Hey Bec I'll be there. Where abouts in the Cas were you planning to be? I work across the road, so that sounds good.

CNR33 Community Regular

CNR33

Posted
Posted
Chris - no idea - Me & Troy will be losing $$$ somewhere.

Give me a call when you get there.

Cool, I'll keep my eyes out for two people standing by a drain pouring their money down it :D

Leewah Veteran

Leewah

Posted
Posted

I'll be playing some poker before the meet. Should be at the cas bout 5:30. I'll give ya a buzz when I get there.

I forgot to mention - I will be at the Casino from about 4.30pmish until the meeting - if anyone wants to come hang out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...