R32 Gtr Standard Boost

[GTsauRus]

hi there

Got a r32 gtr and a quick question

wot is stock boost for a ceramic turbo r32 gtr when the boost solinoid is letting it make max boost.

thanks

[Duncan]

0.8 bar

or 1 bar if you remove the restrictor in the boost line

Edited October 14, 2005 by Duncan

[GTsauRus]

0.8 bar

or 1 bar if you remove the restrictor in the boost line

<{POST_SNAPBACK}>

thanx Duncan

got the profecb but dont know if my car has ceramics or n1s so ive been on min boost(0.5bar) im gonna dial up 0.8 thanx mate.

will ceramics handle 1 bar without tinkle tinkle down the exhaust pipe

[Duncan]

1 bar will probably be OK......

But you can't run a GTR at .5bar even if the boost controller thinks you can. The minimum boost is always set by the wastegate pressure, and any extra boost you want above that is bled off by your boost controller.

[GTsauRus]

1 bar will probably be OK......

But you can't run a GTR at .5bar even if the boost controller thinks you can.  The minimum boost is always set by the wastegate pressure, and any extra boost you want above that is bled off by your boost controller.

<{POST_SNAPBACK}>

I get 0.5bar on an Omoni a pillar guage so i probly should check how accurate it is before i use it to set max boost in case its reading low.

thanx again

[GTsauRus]

I get 0.5bar on an Omoni a pillar guage so i probly should check how accurate it is before i use it to set max boost in case its reading low.

thanx again

<{POST_SNAPBACK}>

Checked the pressure with another pressure guage and compressed air, waste gates opening at 0.6 bar and yes the omoni a pillar guage is reading 0.1 lower( should have realised this cause it sits at -0.1 when the engine is stopped, hmmm)

thanks again for zee help