Jump to content
SAU Community

Recommended Posts

Well, some good news for me. Got my car back! Off ya nut. Just running it in atm but sounds nuts. Off to sydney in 12 hours so hopefully the engine holds together for the drive to melbourne.

Well, some good news for me. Got my car back! Off ya nut. Just running it in atm but sounds nuts. Off to sydney in 12 hours so hopefully the engine holds together for the drive to melbourne.

Glad to hear Paul.

Hope all goes well away for ya.

Post some pics or footage when your there :(

My Dad said he heard some ruff idling, popping car out the front of our place, when he came out it was taking off up the road and there was a Helmet and blowoff valve at the front door, cheers dude!

wassup all, i, pretty sure everyone knows me on this forum? :P . well fer those few who dont i own a ceff atm with light mods bla bla. update on it is i put a bov on it(plumb back) n thats about it.

also i just bought a r32 4door which im gunna turn into my drift pig :D . its silver in colour n needs a little attention :)

post-20231-1133357372.jpg

I havent been around lately but...

Finally got the rear wheels off my GTR.... Had to get a socket machined down so it would fit into the holes of my wheels, then beat the shit out of it so it would stick to the security nuts enough to get them loose. About to go clean up the rotors and paint them up a little along with a general cleanup under there.

No worries timmay. Just finished off for the day at autosalon. Have had a massive week, but the car is running awesome. Turned the injectors down to 80% and is alot smoother now. Blew an intercooler pipe off from newcastle to sydney yesterday, boost controller wasn't set and when I planted it, it ran 2.2 bar. haha, felt good till it popped.

Done anymore on the pig tim?

How's that 32 of yours coming along benny boy?

If you don't know me I own the yellow R33 GTST in lonnie, looking at doing the ecu on my car after Xmas and injectors.

well my car has just got a new set of mags on it in the last few weeks 18" Volk GTC ....waiting on centre caps!

the new turbo on the car is running awsome but needs more juice to unload the boost!

but has been very good so far witht he standard computer.

and SAFC.

post-992-1133993710.jpg

Edited by nizmokid
No worries timmay. Just finished off for the day at autosalon. Have had a massive week, but the car is running awesome. Turned the injectors down to 80% and is alot smoother now. Blew an intercooler pipe off from newcastle to sydney yesterday, boost controller wasn't set and when I planted it, it ran 2.2 bar. haha, felt good till it popped.

Done anymore on the pig tim?

How's that 32 of yours coming along benny boy?

Sounds like its loving every minute of it ther Paulos, 2.2bar thats enough to get any bloke happy :(

NOt much to report on the old car mate other than that the new motor turned up for the drift pig and have new clutch and box bolted up and its ready to be repainted :)

2.2bar go u little red fire engine !!!!! dang paully thats fkn awesome lol

Hang on i thought Pauly's car was White :lol:

If you don't know me I own the yellow R33 GTST in lonnie, looking at doing the ecu on my car after Xmas and injectors.

well my car has just got a new set of mags on it in the last few weeks 18" Volk GTC ....waiting on centre caps!

the new turbo on the car is running awsome but needs more juice to unload the boost!

but has been very good so far witht he standard computer.

and SAFC.

Looks good mate,

hope all the future mods go to plan and look forward to seeing it on the road next time im up that way.

Cheers B

If you don't know me I own the yellow R33 GTST in lonnie, looking at doing the ecu on my car after Xmas and injectors.

well my car has just got a new set of mags on it in the last few weeks 18" Volk GTC ....waiting on centre caps!

the new turbo on the car is running awsome but needs more juice to unload the boost!

but has been very good so far witht he standard computer.

and SAFC.

They are a sexual rim! your whole crew must have em by now?

my updates are, don't get your original 4 stud hubs modified to 5 stud. im not happy with the overall job and further more the safety of them. so i will not be using them at this stage till i get a second opinion from an engineer. but i really think that im gonna have to get some billet ones.

Off to melb for Drift Nationals this weekend so ill give a better report next week

Got a replacement RB20DET, so hopefully will have the car going a bit after new years (I want to get a few things and do some other stuff before I fit the new motor).

Its just another redtop, but it has good compression (170psi most cylinders), all the electrical connectors and stuff are in good nick and its pretty clean externally, doesn't appear to have any real leaks.

If you don't know me I own the yellow R33 GTST in lonnie, looking at doing the ecu on my car after Xmas and injectors.

well my car has just got a new set of mags on it in the last few weeks 18" Volk GTC ....waiting on centre caps!

the new turbo on the car is running awsome but needs more juice to unload the boost!

but has been very good so far witht he standard computer.

and SAFC.

Where are you getting the centre caps from?..... I need some aswell

Where are you getting the centre caps from?..... I need some aswell

getting mine through

http://www.jdmimports.com.au/

or Speedytyres can order a set up here in lonnie.

give them a call.

my brothers Supra's got there Volks from Speedys and caps! :)

update: sold cefiro and bought r33 4door, its a s2 manual.... stock atm but wont be for long :angry:

You suck the big one

now who is going to be the other member of TEAM 2 :lol:

Will post a update when i get back from Brisvegas and for all of you that do know whats happening (SHUT UP TILL I GET HOME) :angry:

Other than that as some would know i was ever so nicely run up the arse in the skyline by one of the other fellow cruise attendee'd lastweek and for my efforts after getting pulled over for a RBT i got a defect for my exhaust (damaged in the incident) and lost 1 point and $80 which means i say bye bye to my lisence as that was the last point i had and i had to borrow it as well :)

Cheers B

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...