Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

well , car now has new rear control arms, tie rods, hicas lock bar in , traction rods, new rear bushes, castor rods, adjustable front camber arms and new seat :P wheel alignment being done as we speak so hopefully can go get it in a few mins :D all prepped for highclere this weekend!

Spent a day with Andy.

Took Jamie for a run that night & I think its fair to say he was impressed.

Few last minute things to do and we are all set to go.

yeah, was chatting to jamie yesterday and he said how well your car went!

What's going on with my car, well it's just going onto the hoist so i can fit me new clutch,

remove the Hicas and all the line's, and fainlly fit the new front upper control arm bushes,

might even fit the ajustable rear upper arm's...

could have a bit on... :P

well , car now has new rear control arms, tie rods, hicas lock bar in , traction rods, new rear bushes, castor rods, adjustable front camber arms and new seat :P wheel alignment being done as we speak so hopefully can go get it in a few mins :) all prepped for highclere this weekend!

who did the wheel alignment? or more so who did you trust to do it lol?

Spent a day with Andy.

Took Jamie for a run that night & I think its fair to say he was impressed.

Few last minute things to do and we are all set to go.

rough figures? your not a forum warrior unless you have hektik ZOMG figures to boast about. Track times mean zilch

stock 26 on what, -5's with supporting mods with track work in mind.... thinking 18-22 psi and 340-380 RWKW's?

who did the wheel alignment? or more so who did you trust to do it lol?

this time since it was such short notice i got bridgestone select to do it, the rough alignment my mate did wasnt too far off perfect! next time might try goodyear, heard good things

GTR is currently in the garage undergoing some minor upgrades.

Turbos coming off to be replaced with a pair of new GT2860R -5's with some Tomei Expreme Dumps.

ViPec ECU is in and was running well until I decided it was time for the turbos to go.

New Castor arms up front, camber and traction arms in the rear. Camber arms for the front are currently being fabricated.

While I am doing this figured I may as well throw in a new Gates timing belt kit along with an N1 Water Pump. (Yes it does see a lot of track work so its worth the extra)

So, looking forward to the Highclere Hillclimb on Feb 13th. Should be a good shakedown for it all.

Andy wont have any problems adapting to ViPec... Did you get the plug in V66 or V88? I'd like to hear what Andy has to say about it, as I'm going to need a more comprehensive ECU when I get back.

I heard of a 33 GTR that was tuned there last week, same turbos as mine, put out 460rwkw atw on 24psi.

There is another 33 GTR getting round Hobart as well apparently that put out 440rwkw, think hat was tuned at the same place also.

Thats enough to convince me... :sick:

It's not so much the peak numbers that the cars put out, be the motors that last after he's tuned them... He tuned XRATED nearly 6 years ago now... the wot tune was spot on for racing, the stock 15yo bottom end lasted two seasons of racing before I blew it up using too much gass on a 200m skid.

460rwkw from -5's ... must be one hell of a head on it.

GL

Justin

stock 26 on what, -5's with supporting mods with track work in mind.... thinking 18-22 psi and 340-380 RWKW's?

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :P

Unfortunately I blew a hose or something today at the Hillclimb and lost 90% of my killerwasps and couldn't get a run in when the hill finally dried out. Had to sit in the pits and watch while I slipped from 2nd outright all the way to 12th as everybody got good clean runs in on the drying track... :blink:

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :D

Unfortunately I blew a hose or something today at the Hillclimb and lost 90% of my killerwasps and couldn't get a run in when the hill finally dried out. Had to sit in the pits and watch while I slipped from 2nd outright all the way to 12th as everybody got good clean runs in on the drying track... :)

i had such a shit day :domokun: i would of been better of running on foot for the event, bring on collinsvale i say to redeem myself lol

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :)

Spot on. Power delivery, reliability and consistancy is they key!

The gods were unkind.

Mine blew a cooler hose off and seeing the pits were a mud bath I wasn't climbing around underneath to put it back on.

Had to watch myself drop from 2nd outright to 12th by the end of the day when the track had dried out and everybody got about 4 - 5 seconds faster. :)

Jamie took out fastest time of the day. Impressing times early on in the wet and then even more so later as the track partially dried so there were mixed conditions on the way up the hill.

Edited by SSHatch
MMMMMmmm the skyline gods were unkind.

how did Jaymie go? I think I saw his car on saturday, in the cbd which made me think he didn't attend?

jamie was up there :) he set fastest time of the day and took out the event lol.

Stock 26 with -5's, Tomei Expreme Dumps, Zorst, ViPec ECU, tuned on Premium (not Ultimate) and running a mere 17psi...

Safe, conservative and more than a handful in the wet...

Figures??? Its the times that do the talking. You can have 4 gazillion killerwasps but if you cant put them to good use then they are worthless :)

Did Andy have much to say about the ViPec? I'd be interested to know what he thought of it.

Times and mph... are the proof. I just do it for the FUN! HA hAH!

From what I can gather, Andy was his usual self and didn't really say much.

He did say that the software was pretty much just another version of the same old stuff.

He did have issues and had to use my laptop instead of his own as there is a very specific sequence that must be followed when installing everything for the first time. If its not done correctly then the wrong USB drivers are installed and the laptop wont connect to the ECU and they are very difficult to uninstall.

Jump on the ViPec website and check out the features for yourself. That and the support offered through the ViPec forums was enough to convince me to go that way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...