Jump to content
SAU Community

Recommended Posts

Lol. If I was still on them I would have been upside down through that corner. I personally use the 595 over the evo any day but I have found they have a limit. I've changed to kuhmo at this stage. 1 2 in the champion ship they must be ok. They have so far been light years ahead but they are way expensive

I have several aspects to revamp on the. Car but can't seem to get into it. Any one got a way to get yourself motivated?

This weather doesn't help much. If you have a goal it helps, as in set a date. Although we figured out you have to be realistic haha.

Spent a bit of time today doing surgery on our car, nothing major just cutting out battery tray which is diseased with rust!

Not sure how much I need to cut out though, if you look at pic below you can see a few areas I have cleaned up with wire wheel that are pitted from rust but not rusted through, do these areas need to go as well or is it ok to just treat and paint?

20120819_135923.jpg

Spent a bit of time today doing surgery on our car, nothing major just cutting out battery tray which is diseased with rust!

Not sure how much I need to cut out though, if you look at pic below you can see a few areas I have cleaned up with wire wheel that are pitted from rust but not rusted through, do these areas need to go as well or is it ok to just treat and paint?

Just coating that should be fine

20120819_135923.jpg

Yeah as jangles said just treat and paint. As long as the Strength of the metal is still there then there's no need to remove it. By cleaning it up like you have and treating it with a metal conditioner/rust converter it will never come back as long as you coat it properly.

So thinking of installing my new BC coilovers myself soon when i get the time, any tips to make it go smoothly, im pretty sure i can do the fronts no problems, just the back im a bit unsure of, ive seen a vid on youtube where he just removes the rear seat, but ive read somewhere that you need to remove the parcel shelf?

also other than height is there anything else i need to adjust before/during install? im prob gonna put the damper on soft as its for the street, but anything else you guys could recommend?

Finally found some motivation. Got a stack of work done to the car today. Repainted one and touthed up the other rims that got badly gravel rashed at symmons. Oil change and sump guard fitted. I've also been revamping the back end and removing weight where I can. Found the toe rod ball joint loose and replaced it with the only spare I have.. Brought a spot drill bit and been in studying panels where I can. Also got some alloy to start making a rear diffuser. On track for round 3. Also hoping to get to the legerwood lane hill climb.

Not too sure you can mate. If your talking about the little spring that sits below the main spring it's just there to locate the top spring and stop it from moving off the seat when under full extension.

ok well from what i figured about he coilovers, the very bottom collar is for lowering/raising the car, and the top one adjusts the preload, the one just below it, makes sure it doesnt move, and from vids and reading new springs can 'settle' so one vid said to tighten the preload by about 5mm to account for that, and i have been told that you just adjust it after bit of driving... just wanted to see if what others have done, so ill prob just install them and check them after a few days...

ok cheers thanks for that,

last thing in this pick my coilovers came with this thing just above the 'c' collar that adjust height, never seen it on a coilover before,

is it ok just to take it off?

post-86245-0-85296800-1346113288_thumb.jpg

it would be to bolt the abs sensor cable to for abs equipped cars

ok cheers, thought that could be the case, as i had a quick look under the car and the stock shocks have something sticking out, i guess its no use to me then

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah its bad eh. Ey! Watch your mouth. Yep, spot on. The rear's are always gone too though from brake checking. I had them perilously close to a tree that we had taken down. I think the tree peeps may have taken it. Either for a trophy, or accidentally.  
    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
×
×
  • Create New...