Jump to content
SAU Community

Recommended Posts

Hi guyz'n'Galz

need some help setting up full boost setting on standard solenoid. I'm very new to this and the guide thats in the D.I.Y isn't much help when you dont know what your looking @. Anyone on the sth side with some spare time to show me what i need 2 do would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/91413-need-help-with-setting-boost/
Share on other sites

there is actually an after market soleniod on my car that was set up by my mechanic but it was 2nd hand and i'm pretty sure its stuffed and its spiking and overfueling the car and backfiring i want 2 set the old solenoid back up and just run @ a high boost all the time

something i did that allowed me to run 11 psi constantly was to bypass the standard actuator, run a hose from the turbo actuator to the inlet pipe and put a "T" piece between that hose venting to atmosphere. with the other small hose that would join the stock boost solinoid i just blocked with a bigg ass screw. all this does is change the pressure, so the wastegate opens later rather than earlier. it sounds tricky but really is simple.

I'd show you a photo, but my car got pinched so all ican do is try to explain it.

If your car is backfiring and overfueling, id suggest you take it to nissan and get them to run a diagnostic on the computer and see if that shows up what could be the problem. I had a similer problem and Nissan did that test and i had a faulty Knock sensor. once that was repaired the car ran sensationally...

Loz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...